Herefordshire · England
Shower Tray Repair in Holmer
Our technicians come to Holmer for shower tray chip, crack and scratch repairs and resurfacing. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Snagging damage in a new bathroom
- Chipped corners or rims
What happens on the day
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours for a repair, longer for a full resurface, and we finish with a tidy-up and a look at the finished work together.
- We check the tray is firmly supported and find the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We match the colour, or refinish the full tray.
- Once cured, normally by the next day, you can use the shower.
Preparing for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Shower tray repair at your home in Holmer
Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes are all things we fix in place. Whether it’s movement when you stand on it and scratches in the surface, we can help, whatever the material.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Holmer (HR4, HR1)
- Area hub
- Herefordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Do not stand heavy bottles on the tray
- Use the extractor fan
- Give the tray a quick rinse after use
- Use a mild, non-abrasive cleaner
Keep an eye on the sealant, and replace it when it splits or goes black.
A small crack lets in a little water every time you shower, and over months that can rot the floor. An early repair is far cheaper than floor repairs.
Common problems we fix in Holmer
The waste is a common starting point for cracks, because that’s where the tray is weakest and the fitting puts pressure on it.
Signs it’s time to call us include:
- Chipped corners or rims
- Scuffs and light scratches
- Damage around the waste
- A tray that flexes
What your quote should include
- Who turns up on the day
- What preparation is included
- Whether the colour is mixed to match
- What happens if they find more damage
Different materials, different repairs
Acrylic
Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.
Your questions about shower tray repair in Holmer
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
How long before I can shower?
You will get the exact time when we finish.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you come to Holmer?
We do. We send a technician to Holmer for every job, and the price is the same as everywhere else.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
What happens next?
You will get a fixed quote back. You’re under no obligation.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks under the tray
- A tray broken in more than one place
- A tray that moves underfoot
Send us photos and we will tell you honestly.
Materials we work on in Holmer
- Enamelled steel
- Cast iron
- Acrylic
- Ceramic
- Stone resin
Repairing versus replacing in Holmer
A new shower tray normally involves removing the screen and tiling, preparing a new base and re-tiling. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- No need to remove anything
- Fixed prices from your pictures
Read our prices page.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What affects the price in Holmer
Repairs from £95. There’s no charge for travel to Holmer. The price comes down to:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- The type of damage
- The colour and finish to match
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- Where you are, by postcode
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the entire shower tray, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Where we work around Holmer
Holmer is about 1 mile north of Hereford, in Herefordshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Our technicians cover all 255 towns and villages across Herefordshire. Our jobs stretch from Holmer to Birmingham (about 44 miles away).
Postcode districts we cover here: HR4 and HR1. That includes homes on Roman Road, Attwood Lane and Monarch Road and the roads around them. Holmer sits on or near the A4103, which makes travel easy. Nearby, we also work in Widemarsh (1 mile south), Bobblestock (1 mile west), Huntington (1 mile west), Pipe and Lyde (1 mile north) and Whitecross (1 mile south-west). Further out, we also cover Ross-on-Wye (13 miles south-east), Ledbury (13 miles east), Leominster (10 miles north), Newton Farm (3 miles south), Merrivale (13 miles south-east) and Bromyard (12 miles north-east).
What’s near Holmer
Typical jobs here are in homes near Holmer CofE Academy, Church of St Bartholomew and Golden Lion pub, among other places. You’ll also find Whitecross Hereford (1.2 miles south-west) and Robert Owen Academy (1.2 miles south). Holmer’s nearest station is Hereford station, roughly 1.2 miles south-east. Further afield, we also cover the area around Hereford Castle (1.7 miles south) and Victoria Eye Hospital (1.4 miles south). Green spaces nearby include Dinedor Hill and Lugg Meadow.
Nearby places to Holmer
What else we do in Holmer
About our accreditations · Every repair comes with a one-year guarantee.
