North Yorkshire · England
Shower Tray Repair in Kirby Wiske
Shower tray repair for Kirby Wiske, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- A cracked shower tray
- A tray that flexes
What affects the price in Kirby Wiske
Repairs from £95. You won’t pay by the hour. The price is based on:
- How many items we do on one visit
- What kind of damage it is
- Previous DIY repairs that have to come out
- How hard the colour is to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Shower tray repair in Kirby Wiske, done in place
Most tray damage can be repaired in place, from chipped edges to cracks across the floor of the tray. We match the colour and finish so the repair blends in. Whether it’s scratches in the surface and a crack across the base, we can help.
All our work is covered by a one-year guarantee.
- Area
- Kirby Wiske (YO7)
- Area hub
- North Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Kirby Wiske
The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Our shower tray repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why Kirby Wiske clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Rooms protected and left tidy
- Colours mixed by hand to suit your surface
- No extra charge for your area
See our pricing.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A tray broken in more than one place
- Leaking waste fittings
- Rotten or damaged flooring underneath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Stone resin
- Enamelled steel
- Cast iron
- Ceramic
- Acrylic
Materials and what they mean for the repair
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Common problems we fix in Kirby Wiske
Trays fitted on timber floors can crack if the floor moves, particularly if it wasn’t fully bedded. On solid floors, cracks usually point to an uneven base.
Keep an eye out for any of the following:
- Damage from a refit or building work
- A damaged area around the waste
- Chipped corners or rims
- Staining and dullness across the tray
Questions to ask before booking
- When it can be used again
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- Who will actually do the work
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, or most of a day for a full resurface. We tidy up before we leave and tell you when it’s ready to use.
- First we check the tray is solid and work out why any crack happened.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- We match the colour, or refinish the full tray.
- Once cured, typically by the next day, you can use the shower.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
- Have a window or extractor fan available
Get a quote
To get a price, send a couple of photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Use a mild, non-abrasive cleaner
- Keep heavy bottles on a shelf
- Ventilate the room after showers
- Check the seal every few months
Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.
Failed sealant around a tray should be replaced quickly. Water gets behind and under the tray and can damage the floor below.
Kirby Wiske questions
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Are there extra charges for Kirby Wiske?
There’s no separate call-out charge. Your fixed quote includes everything.
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send photos.
Is a cracked tray repairable?
Typically, as long as it doesn’t flex. The crack is reinforced, filled and refinished.
Landlords, agents and businesses in Kirby Wiske
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Our work in Kirby Wiske
Kirby Wiske is about 6 miles south of Northallerton, in North Yorkshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Kirby Wiske is one of 626 towns and villages in North Yorkshire we cover. Our jobs stretch from Kirby Wiske to Leeds (about 31 miles away).
Jobs in YO7 work the same way as everywhere else we cover. Other places close to Kirby Wiske include South Otterington (2 miles north), Sandhutton (2 miles south), Maunby (2 miles north-west), Pickhill (2 miles south-west) and Sinderby (3 miles south-west). Within a short drive, we also cover Ripon (10 miles south-west), Catterick Garrison (14 miles north-west), Northallerton (6 miles north), Thirsk (4 miles south-east), Colburn (14 miles north-west) and Easingwold (13 miles south-east).
Near you in Kirby Wiske
Typical jobs here are in homes near Breckenbrough School and St John the Baptist's Church, among other places. For rail, the closest station is Thirsk station, roughly 3 miles south-east of the centre. Other landmarks nearby include Breckenbrough Castle (under half a mile south) and Friarage Hospital (5.9 miles north).
Nearby places to Kirby Wiske
More services for Kirby Wiske
About our accreditations · Every repair comes with a one-year guarantee.
