Swansea · Wales

Shower Tray Repair for Limeslade homes

Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Limeslade. Free, fixed quotes from your photos.

  • Repairs from £95
  • A tray that creaks or moves underfoot
  • Scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Limeslade

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Ventilate the room after showers
  • Use a mild, non-abrasive cleaner
  • Do not use strong acids or bleach
  • Get a moving tray checked

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.

A small crack lets in a little water every time you shower, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

Shower tray repair at your home in Limeslade

Shower tray repairs are one of our most common jobs. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. Typical jobs include movement when you stand on it and snagging damage in a new bathroom, in enamelled steel, stone resin and acrylic.

You get a one-year guarantee, the same in Limeslade as everywhere else we work.

Stained shower tray resurfaced to clean white, before and after
Location
Limeslade (SA3)
Region
Swansea
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

FAQs for Limeslade

Is the work guaranteed?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

Can you quote from pictures?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

Can you replace the silicone at the same time?

Yes, if you’d like us to. It’s a good time to replace old sealant.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll do the rest.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Should you replace it?

Trays sit under the screen and tiles, so taking one out disturbs a lot. Repairing it avoids that disruption. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why choose Surface Doctor in Limeslade

  • Fixed prices from your pictures
  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • CHAS, Constructionline and SafeContractor accredited

See our prices page.

Do you need shower tray repair in Limeslade?

Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.

Signs it’s time to call us include:

  • Staining and dullness across the tray
  • A tray that flexes
  • Scratches in the surface
  • Chips caused during fitting

Questions to ask before you book

  • How to look after the finish
  • How soon you can use it again
  • Whether the price covers travel
  • How your room will be protected

Our hiring checklist

About Limeslade

Limeslade is about 4 miles south-west of Sandfields, in Swansea. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Limeslade is one of 153 towns and villages in Swansea where we work.

All of SA3 is covered, from the main roads to the quietest streets. Jobs here include addresses on Park Avenue, Higher Lane and Plunch Lane and the roads around them. If you’re just outside Limeslade, we cover The Mumbles (1 mile north-west), Oystermouth (1 mile north-west), Langland (1 mile west), West Cross (1 mile north-west) and Norton (1 mile north-west). Further out, we also cover Swansea (5 miles north), Castle (4 miles north-east), Morriston (8 miles north), Mount Pleasant (4 miles north-east), Gorseinon (7 miles north) and Dyfaty (5 miles north-east).

Landmarks near Limeslade

Typical jobs here are in homes near All Saints' Church, Oystermouth Primary School and The George pub. The closest station to Limeslade is Swansea station, about 4.6 miles north-east. Further afield, we also cover the area around Singleton Hospital (2.9 miles north) and Egypt Centre - Swansea University (3 miles north). Not far away are Mumbles Hill and Bishop's Wood.

Map of Limeslade © OpenStreetMap contributors

What shower tray repair costs

Repairs from £95. We give every job a fixed price from photos. This is what makes a difference:

  • How hard the colour is to match
  • The type of damage
  • How easy the damage is to reach
  • How much damage there is

Our prices are the same across the UK, so there is no premium for Limeslade. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear pictures are usually enough. Try to include:

  • Your postcode, so we can check dates
  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

What we cannot put right

We will always be straight with you, so here’s what a repair cannot fix:

  • A tray broken in more than one place
  • Rotten or damaged flooring underneath
  • Leaking waste fittings

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Ceramic
  • Stone resin
  • Acrylic
  • Enamelled steel
  • Cast iron

How the visit works

The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours, or most of a day for a full resurface. Before we leave, we explain how soon it can be used and how to look after it.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. Next we clean and prepare the tray.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. We colour-match the repair, or spray a new finish across the whole tray.
  5. Once cured, normally by the day after, you can use the shower.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Ensure the room can be ventilated
  • Have somewhere for us to park nearby if possible

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed quote

Related advice

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.