Swansea · Wales
Bath re-enamelling & resurfacing in Limeslade, Swansea
Bath re-enamelling in and around Limeslade: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
When to call us in Limeslade
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Stains that won’t shift
Comparing quotes
- Whether a trained technician does the job
- When it can be used again
- Whether there are any call-out or travel charges
- How your room will be protected
Bath re-enamelling in Limeslade, done in place
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for a period or roll-top bath worth keeping and wear marks under the taps, on Victorian roll-tops, pressed steel baths and acrylic baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Limeslade (SA3)
- Region
- Swansea
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Limeslade
Limeslade is about 4 miles south-west of Sandfields, in Swansea. Wherever you are in the SA3 postcode area, we come to you. Limeslade is one of 153 towns and villages in Swansea where we work.
Here we cover the SA3 postcode area. Whether you live on Park Avenue, Higher Lane and Plunch Lane or anywhere nearby, we can come to you. Neighbouring places we cover include The Mumbles (1 mile north-west), Oystermouth (1 mile north-west), Langland (1 mile west), West Cross (1 mile north-west) and Norton (1 mile north-west). Within a short drive, we also cover Swansea (5 miles north), Castle (4 miles north-east), Morriston (8 miles north), Mount Pleasant (4 miles north-east), Gorseinon (7 miles north) and Dyfaty (5 miles north-east).
Landmarks near Limeslade
Locally, our jobs take us to homes close to All Saints' Church, Oystermouth Primary School and The George pub, among other places. Limeslade’s nearest station is Swansea station, about 4.6 miles north-east of the centre. Well-known places in the area include Singleton Hospital (2.9 miles north) and Egypt Centre - Swansea University (3 miles north). The countryside around Limeslade includes Mumbles Hill and Bishop's Wood.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
- Have chips seen to early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Limeslade questions
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Honest limits
To be straight with you, some problems need a different fix:
- A metal bath with a through crack
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Landlord and trade work in Limeslade
We carry out planned and one-off repairs for housing associations and facilities teams in Swansea and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Repairing versus replacing in Limeslade
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- Everything repaired in place
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
Take a look at our pricing and resurfacing vs replacement cost guide.
The process
We begin by going over the job with you. Next, we cover and mask everything nearby and we start. Allow the best part of a day, and we will tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- How many items we do on one visit
- The colour and finish to match
- Any earlier repairs that need removing first
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Two or three clear photos are typically enough. Try to include:
- The material, if you know it
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Where you are, by postcode
Upload photos of the damage and one of the whole item, with your SA3 postcode, and we will reply with a fixed price.
Places near Limeslade
What else we do in Limeslade
About our accreditations · Every repair comes with a one-year guarantee.
