Lancashire · England

Shower Tray Repair for Lower Ballam homes

Shower tray repair in and around Lower Ballam: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips or cracks by the plughole
  • Scuffs and light scratches
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Lower Ballam

How we handle shower tray repair in Lower Ballam

You don’t always need a new tray. If it’s solid underneath, it can normally be repaired in place, which is far less work than a replacement. If you are dealing with chips or cracks by the plughole and scratches in the surface, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Before and after: an old shower tray refinished by Surface Doctor
Area
Lower Ballam (FY8)
Region
Lancashire
Warranty
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Common problems we fix in Lower Ballam

Dull and stained trays are typically down to cleaning: limescale, harsh chemicals and abrasive pads wear the finish away.

If you can see any of these, send us a picture:

  • A cracked shower tray
  • A dull, stained or worn surface
  • Edge chips from dropped bottles
  • Chips or cracks by the plughole

Questions to ask before you book

  • The length of the guarantee and what it covers
  • Whether cleaning and preparation are in the price
  • What happens if they find more damage
  • Whether the price is fixed and includes VAT

Our hiring checklist

Repairing versus replacing in Lower Ballam

A new shower tray normally involves removing the screen and tiling, preparing a new base and tiling again. Repairing or resurfacing the tray leaves all of that alone. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Everything repaired in place
  • CHAS and Constructionline accredited
  • Rooms protected and left tidy
  • Free fixed quotes from pictures

Read our full price list.

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, or most of the day to resurface the whole tray, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The surrounding area is sheeted and masked.
  2. Any sealant in the way is cut out.
  3. We clean and key the tray, then repair the damage.
  4. We refinish the surface to match the tray.
  5. We tidy up and tell you when you can shower.

How to prepare

  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Advice

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Ventilate the room after showers
  • Get a moving tray checked
  • Store bottles off the tray
  • Avoid strong descalers and bleach

Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, where it causes damage you can’t see.

Prices and what affects them

Repairs from £95. You will not pay by the hour. The price depends on:

  • Access to the area
  • Doing more than one item at once
  • What kind of damage it is
  • How many areas need work

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send pictures for a quote

When you take your photos, a few simple things make all the difference:

  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire shower tray, we can give you a fixed quote without visiting.

Lower Ballam and nearby

Lower Ballam is about 2 miles north-east of Lytham St Anne's, in Lancashire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We cover all 482 towns and villages across Lancashire, from the larger towns to small villages. We work right across the region, from Lower Ballam to Liverpool (25 miles away).

Postcode districts we cover here: FY8. If you are just outside Lower Ballam, we cover Higher Ballam (1 mile south-west), Peel (1 mile north-west), Moss Side (1 mile east), Little Plumpton (1 mile north-east) and Westby (1 mile north-east). Further out, we also cover Preston (11 miles east), Bamber Bridge (13 miles east), Leyland (12 miles south-east), Fulwood (10 miles east), Fleetwood (10 miles north) and Ormskirk (15 miles south).

Near you in Lower Ballam

We visit homes around St Bede's Catholic High School and St Matthew, among other places. The nearest railway station is Moss Side station, roughly 0.9 miles south-east. A little further out are Lytham Hospital (2.4 miles south) and Lytham Motive Power Museum (2.3 miles south-east). Green spaces nearby include Marton Mere.

Map of Lower Ballam © OpenStreetMap contributors

When a repair isn’t the answer

We will not take on work that won’t last, so here’s what a repair can’t put right:

  • Plumbing leaks under the tray
  • Movement caused by a poor base, until the support is fixed
  • A tray broken in more than one place

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we repair

  • Stone resin
  • Acrylic
  • Cast iron
  • Enamelled steel
  • Ceramic

Lower Ballam: your questions answered

Do you come to Lower Ballam?

We do. We send a technician to Lower Ballam for every job, with no extra charge for travel.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.

Can you resurface a whole tray?

Yes, it’s a common job. A full resurface makes a tired tray look fresh.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.

Is it OK to use a cracked tray?

We would stop using it until it’s repaired, in case water is getting through.

Different materials, different repairs

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and we match repairs to the surface finish.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.