Wiltshire · England

Shower tray repair & resurfacing in Mildenhall, Wiltshire

Shower tray chip, crack and scratch repairs and resurfacing for homeowners, landlords and businesses in Mildenhall. Send photos for a free, fixed quote.

  • Repairs from £95
  • Cracks running from the waste
  • Scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Mildenhall

About our shower tray repair in Mildenhall

You do not always need a new tray. If it’s firmly supported, we can repair it where it is, saving you the cost and mess of a new one. We work on enamelled steel, stone resin and acrylic, and the jobs we see most are chips on the edges and a dull, stained or worn surface.

You get a one-year guarantee, the same in Mildenhall as everywhere else we work.

Where
Mildenhall (SN8)
Area hub
Wiltshire
Cover
One year on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Can I fix it myself?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Stick to gentle cleaners
  • Do not ignore a tray that flexes
  • Give the tray a quick rinse after use
  • Replace failing sealant promptly

Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.

A small crack lets in a little water every time you shower, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.

What we cannot put right

A repair is not right for every job, including:

  • A tray that moves underfoot
  • Plumbing leaks under the tray
  • A tray broken in more than one place

Send us photos and we will tell you honestly.

Materials we work on in Mildenhall

  • Ceramic
  • Cast iron
  • Enamelled steel
  • Stone resin
  • Acrylic

What affects the price in Mildenhall

Prices start from £95. We price every job individually. What matters most is:

  • The material and finish
  • How hard the colour is to match
  • Doing more than one item at once
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Getting a price from pictures

You can typically get a fixed quote without us visiting. To help us price it:

  • Daylight if possible, and no flash reflection
  • One sharp close-up of the damage
  • Details of any past repairs
  • Where you are, by postcode

For a price in Mildenhall, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

When to call us in Mildenhall

Cracks often start at the waste, because that is where the tray is weakest and the fitting puts pressure on it.

Typical reasons for a call-out include:

  • Cracks running from the waste
  • Chipped corners or rims
  • Chips caused during fitting
  • A tray that looks tired however much you clean it

Questions to ask before booking

  • How to care for the finish
  • What preparation is included
  • What protection goes down before work starts
  • Is the price fixed, and does it include VAT?

Our hiring checklist

Repairs by material

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.

Stone resin

Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips can be filled and matched.

What happens on the day

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a few hours, or most of a day for a full resurface, and we’ll tell you if anything changes.

  1. We make sure the tray does not flex and look for the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. Chips and cracks are filled, reinforced and sanded level.
  4. The repair is colour-matched, or the entire tray gets a new finish.
  5. Once cured, normally by the next day, you can use the shower.

Preparing for the visit

  • Have a window or extractor fan available
  • Let us know which floor the room is on
  • Point us to the nearest place to park

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Send photos for a quote

Related advice

Mildenhall: your questions answered

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before and we’ll plan for it.

What does shower tray repair cost?

Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

How long does it take to cure?

We will give you the curing time on the day.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Landlord and trade work in Mildenhall

We work for landlords, letting agents and housing providers in Mildenhall as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

Covering Mildenhall

Mildenhall is about 11 miles south-east of Swindon, in Wiltshire. We travel to homes and businesses in Mildenhall and the surrounding area, so you do not need to take anything anywhere. Our repair technicians cover all 425 towns and villages across Wiltshire. You can also see our page for London, about 69 miles away.

We work across SN8 and the streets around it. Whether you live on Thicketts Road, Cock-a-Troop Lane and Berrycroft or anywhere nearby, a technician can come to you. We also cover the places around Mildenhall: Stitchcombe (1 mile east), Axford (2 miles east), Marlborough (2 miles west), Cadley (2 miles south) and Ogbourne Maizey (2 miles north-west). Within a short drive, we also cover Calne (13 miles west), Devizes (14 miles west), Pewsey (7 miles south-west), Lyneham (13 miles north-west), Wick (14 miles south-west) and Aldbourne (5 miles north-east).

Local landmarks in Mildenhall

Our clients here include homes close to Church of St John the Baptist and St John's Marlborough. Nearby you’ll also find Marlborough and Ramsbury Rural District (1.6 miles west) and Savernake Hospital (0.9 miles south-west).

Map of Mildenhall © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.