Cornwall · England
Shower tray repair & resurfacing in Victoria, Cornwall
Shower tray chip, crack and scratch repairs and resurfacing at your home in Victoria, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and light scratches
- Staining and dullness across the tray
Shower tray repair in Victoria, done in place
We repair a lot of shower trays. Chipped edges, cracks and worn finishes can all be put right without removing the tray. Common call-outs are for scratches from cleaning or grit and a tray that looks tired however much you clean it, on enamelled steel, stone resin and cast iron.
Big or small, you get the same one-year guarantee in Victoria and across Cornwall.
- Area
- Victoria (PL26)
- County
- Cornwall
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Victoria
Rigid trays don’t bend, they crack when they sit on an uneven or poorly supported floor. Movement in a timber floor has the same effect.
It’s worth getting a quote if you see:
- Snagging damage in a new bathroom
- A tray that creaks or moves underfoot
- Chips on the edges
- Cracks running from the waste
Comparing quotes
- How the colour is matched
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- When it can be used again
Also in Victoria
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.
Stone resin
Stone resin is a dense, rigid material with a smooth gel coat. Poor support underneath leads to cracks, and chips can be filled and matched.
How it works
Arrival times are agreed in advance. On site, it takes a few hours for a repair, longer for a full resurface. We leave the room clean and ready to use once it has cured.
- The surrounding area is sheeted and masked.
- Old sealant is removed if it’s in the way.
- We clean and key the tray, then repair the damage.
- The surface is refinished to match.
- We tidy up and tell you when you can shower.
How to prepare
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Tell us if there are stairs or a lift
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Victoria and the surrounding area
Victoria is about 6 miles south-west of Bodmin, in Cornwall. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Victoria is one of 644 towns and villages in Cornwall where we work.
Every address in PL26 is covered. Jobs here include addresses on Victoria Road and Penstraze Lane. If you are just outside Victoria, we cover Trebilcock (1 mile south), Roche (1 mile south), Trezaise (2 miles south), Rosehill (2 miles north-east) and Hallew (2 miles south-east). We also work in nearby towns such as Truro (15 miles south-west), Newquay (10 miles west), St Austell (6 miles south), Bodmin (6 miles north-east), Sandy Bottom (6 miles south-east) and Bethel (6 miles south-east).
Near you in Victoria
Typical jobs here are in homes near Church of St Gomonda, The Victoria Inn and Roche Community Primary School, among other places. There’s a railway station in Victoria itself: Roche station. A little further out are Bodmin Hospital (5.1 miles north-east). Green spaces nearby include Hensbarrow Beacon and Tresayes Quarry.
What affects the price in Victoria
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Unusual colours or finishes
- How much damage there is
- The material and finish
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- The material, if you know it
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
For a price in Victoria, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Questions from Victoria
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Can you resurface a whole tray?
Yes. The whole tray can be resurfaced.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are there extra charges for Victoria?
Travel is included in the price, with the same prices everywhere we work.
How do I get a price for shower tray repair in Victoria?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Victoria as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Damage below the tray that needs a builder
- Leaks from the waste or pipework (a plumber’s job)
- Multiple cracks across the tray
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Ceramic
- Enamelled steel
- Acrylic
- Stone resin
- Cast iron
Looking after it afterwards
Aftercare is simple:
- Get a moving tray checked
- Use the extractor fan
- Keep heavy bottles on a shelf
- Stick to gentle cleaners
Wait the full curing time before you shower. After that, mild cleaners and good ventilation are all it needs.
A tray that moves underfoot needs looking at, before it cracks.
About our accreditations · Every repair comes with a one-year guarantee.
