Staffordshire · England

Shower tray repair & resurfacing in Wedge's Mills, Staffordshire

Shower tray chip, crack and scratch repairs and resurfacing in Wedge's Mills, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A tray that looks tired however much you clean it
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Need shower tray repair in Wedge's Mills?

Where we work around Wedge's Mills

Wedge's Mills is about 2 miles south-west of Cannock, in Staffordshire. Clients in Wedge's Mills get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in all 512 towns and villages across Staffordshire. You can also see our page for Birmingham, about 16 miles away.

All of WS11 and WV10 is within our area. You will find streets such as Wood Lane, Woodhaven and Hall Meadow, all of which we cover. Other places close to Wedge's Mills include Middle Hill (1 mile south), Four Crosses (1 mile north-west), Great Saredon (1 mile west), Bridgtown (1 mile east) and Hatherton (1 mile north). Larger places within reach include Stafford (9 miles north), Lichfield (9 miles east), Rugeley (7 miles north-east), Burntwood (5 miles east), Hednesford (3 miles north-east) and Wombourne (12 miles south-west).

What’s near Wedge's Mills

Around Wedge's Mills, we work in homes near Cheslyn Hay Sport and Community High School, Longford Primary School and St Saviours Church and the streets around them. Wedge's Mills’s nearest station is Cannock station, roughly 1.5 miles north-east of the centre. A little further out are Cannock Chase Hospital (1.6 miles north-east) and Cheslyn Hay North and Saredon (less than half a mile south).

Map of Wedge's Mills © OpenStreetMap contributors

Shower tray repair in Wedge's Mills, done in place

We repair a lot of shower trays. Chipped edges, cracks and worn finishes are all things we fix in place. Whether it’s damage around the waste and chipped corners or rims, we can help, whatever the material.

A one-year guarantee comes as standard, so you’re covered after the visit.

Where
Wedge's Mills (WS11, WV10)
Region
Staffordshire
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Repairs by material

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.

Enamelled steel

Enamelled steel trays behave like steel baths. Chips can rust if they’re left, so early repairs help.

For landlords and businesses

Landlords, letting agents and housing providers in Wedge's Mills use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Wedge's Mills: your questions answered

Can I keep using a cracked tray?

Only if you’re sure it is not leaking. Look for damp or stains below.

How long does it take to cure?

Usually the next day. We will confirm before we leave.

Do you come to Wedge's Mills?

Yes, we do. Technicians travel to Wedge's Mills from across the region, with no extra charge for travel.

Is the work guaranteed?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

What does shower tray repair cost?

Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your WS11 postcode.

Will there be a smell?

Expect a mild smell while we’re working.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

The process

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a few hours, or most of the day to resurface the whole tray. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. We ensure the tray does not flex and look for the cause of any crack.
  2. We clean and prepare the damaged area or the whole tray.
  3. We fill and strengthen any chips or cracks and sand them smooth.
  4. The repair is colour matched, or the entire tray gets a new finish.
  5. We leave it to cure; the shower is normally usable the following day.

How to prepare

  • Clear the area around the damage
  • Ensure the room can be ventilated
  • Mention any parking restrictions or tricky access

Ask for a price

If you’re in Wedge's Mills and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Read more

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Keep harsh chemicals off the tray
  • Rinse the tray after each shower
  • Get a moving tray checked
  • Replace failing sealant promptly

Rinse the tray after use, use mild, non-abrasive cleaners, and keep the sealant in good condition so water can’t get underneath.

Stop using the shower if the tray is cracked. Water may be getting under the tray, and the damage below isn’t visible.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

What we cannot put right

We will not take on work that won’t last, so these are the limits:

  • A tray broken in more than one place
  • Plumbing leaks under the tray
  • Rotten or damaged flooring underneath

Send us photos and we’ll tell you honestly.

What we work on

  • Enamelled steel
  • Stone resin
  • Acrylic
  • Cast iron
  • Ceramic

How we price shower tray repair

Prices start from £95. Each job gets its own fixed price. These are the things that affect it:

  • Access to the area
  • What kind of damage it is
  • Any earlier repairs that need removing first
  • Unusual colours or finishes

Our prices are the same across the UK, with no extra for Wedge's Mills. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your photos

We price nearly every job from pictures. This is what to send:

  • Natural light rather than flash
  • The material, if you know it
  • A close-up of the damage, in focus
  • Details of any past repairs

The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.

Signs you need shower tray repair in Wedge's Mills

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks usually point to an uneven base.

Get in touch if you’ve noticed any of these:

  • Chipped corners or rims
  • Chips caused during fitting
  • Damage around the waste
  • Scratches from cleaning or grit

Comparing quotes

  • How your room will be protected
  • Whether the price covers travel
  • Whether the price is fixed and includes VAT
  • What prep work is covered

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.