North Yorkshire · England

Shower tray repair & resurfacing in Willerby, North Yorkshire

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Willerby and across North Yorkshire. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Chipped corners or rims
  • Chips caused during fitting
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Willerby

Looking after it afterwards

To keep it looking its best for years:

  • Give the tray a quick rinse after use
  • Reseal when the silicone splits or turns black
  • Keep heavy bottles on a shelf
  • Ventilate the room after showers

Rinse the tray after use, clean with mild cleaners, and keep an eye on the sealant so water cannot get underneath.

Every shower forces a little water into a crack, and over months that can rot the floor. An early repair is far cheaper than floor repairs.

About our shower tray repair in Willerby

Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes can all be put right without removing the tray. Whether it’s damage from a refit or building work and a tray that looks tired however much you clean it, we can help.

Whatever the size of the job, it’s backed by a one-year guarantee in Willerby and across North Yorkshire.

Where
Willerby (YO12)
Area hub
North Yorkshire
Guarantee
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Willerby: your questions answered

What if the damage is worse than the photos show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How do I book?

Photos of the damage, a photo of the entire shower tray and your postcode. After that, we just agree a date.

Can you make an old tray look new?

Yes. The whole tray can be resurfaced.

Can you replace the silicone at the same time?

Yes. Add it to your quote and we’ll do both on one visit.

What does shower tray repair cost?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.

Repair or replace: which is better?

The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Our shower tray repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

What you get with us

  • Fixed prices from your photos
  • We come to you, anywhere in the UK
  • Straight answers about what a repair can do
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list.

What we are called out for in Willerby

Most cracked trays are trays that flex: if a tray wasn’t bedded on a solid, even base, it flexes each time someone stands on it. Dropped bottles cause most chips.

Clients normally contact us about:

  • Scratches in the surface
  • Chips caused during fitting
  • A tray that creaks or moves underfoot
  • Chips or cracks by the plughole

What your quote should include

  • Whether a trained technician does the job
  • What aftercare is recommended
  • What the guarantee covers, and for how long
  • Whether the colour is mixed to match

10 questions to ask before booking

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Leaking waste fittings
  • Multiple cracks across the tray
  • Damage below the tray that needs a builder

Not sure? Send photos and we will give you a straight answer before booking.

Materials we work on in Willerby

  • Ceramic
  • Enamelled steel
  • Acrylic
  • Cast iron
  • Stone resin

How it works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, or most of a day for a full resurface. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. We make sure the tray does not flex and look for the cause of any crack.
  2. Next we clean and prepare the tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour-matched, or the whole tray gets a new finish.
  5. Once cured, normally by the next day, you can use the shower.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Let us know if it has been repaired before

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Get a fixed quote

Read more

Materials and what they mean for the repair

Acrylic

Acrylic-capped trays are lighter, so good support matters. We repair cracks and scratches.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

Willerby and nearby

Willerby is about 6 miles south of Scarborough, in North Yorkshire. Anywhere in YO12, a technician comes to you. Our technicians cover 626 places in North Yorkshire. We work right across the region, from Willerby to Leeds (52 miles away).

Here we cover the YO12 postcode area. Local streets include Wain's Lane, Lowfields and Ings Close. Close by, we cover Staxton (1 mile east), Binnington (1 mile west), Flixton (2 miles east), Ganton (2 miles south-west) and Seamer (3 miles north). We also work in nearby towns such as Scarborough (6 miles north), Falsgrave (6 miles north), Malton (15 miles west), Filey (6 miles east), Pickering (14 miles west) and Northstead (7 miles north).

What’s near Willerby

Locally, our jobs take us to homes close to Church of St Peter, among other places. The closest station to Willerby is Seamer station, about 3.2 miles north-east of the centre. Further afield, we also cover the area around Ayton Castle (4 miles north) and Scarborough Hospital (5.8 miles north). Not far away are Oliver's Mount and Scarborough Mere.

Map of Willerby © OpenStreetMap contributors

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Work for landlords and builders

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We work for landlords, letting agents and housing providers in Willerby as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.