Moray · Scotland
Bath re-enamelling & resurfacing in Aberlour, Moray
Bath re-enamelling across Aberlour and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
For landlords and businesses
We work for landlords, letting agents and housing providers in Aberlour as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Bath re-enamelling at your home in Aberlour
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Whether it’s an old resurfacing that’s failing and staining under the taps and around the waste, we can normally put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Aberlour (AB38)
- Region
- Moray
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Our work in Aberlour
Aberlour is about 12 miles south of Elgin, in Moray. Anywhere in AB38, a technician comes to you. Aberlour is one of 58 towns and villages in Moray we cover.
All of AB38 is within our area. Local streets include Mary Avenue, High Street and Hill Avenue, and we cover them all. Close by, we cover Charlestown of Aberlour (1 mile south-west), Craigellachie (2 miles north-east), Rothes (4 miles north), Dufftown (4 miles south-east) and Drummuir (7 miles east). Larger places within reach include Elgin (12 miles north), Keith (11 miles north-east), Ashgrove (12 miles north), Fochabers (11 miles north-east) and Lhanbryde (11 miles north). Some remote addresses need extra planning, so call us to arrange it.
What’s near Aberlour
In Aberlour, that means homes near St Margaret's Episcopal Church and Burial Ground, The Mash Tun pub and The Alice Littler Park. Further afield, we also cover the area around Ladycroft Agricultural Museum (1.6 miles north-west) and Fleming Cottage Hospital (under half a mile south-west). Not far away are Ben Aigan.
Aberlour: your questions answered
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
How much does bath re-enamelling cost in Aberlour?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a full day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Read more
Repair or replace in Aberlour?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Aberlour customers choose us
- One price list for the entire UK
- Colour-matched on site
- A fixed quote before you book
- We come to you, anywhere in the UK
Take a look at our pricing or bath cost comparison.
Places near Aberlour
What else we do in Aberlour
Prices and what affects them
Prices start from £350. There’s no charge for travel to Aberlour. The price depends on:
- The colour and finish to match
- How many areas need work
- Previous DIY repairs that have to come out
- How many items we do on one visit
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
Phone photos are fine. Ensure they show:
- Any details about the material
- Natural light rather than flash
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Common problems we fix in Aberlour
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- A roll-top that is seen better days
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Questions to ask before you book
- How the room is protected while they work
- The length of the guarantee and what it covers
- How the colour is matched
- What happens if the damage is worse than the pictures show
Keeping it looking good
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- A dripping tap should be fixed promptly
- Never use suction bath mats
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
