Shropshire · England
Bath Re-enamelling in Acton Scott
Fixed-price bath re-enamelling in Acton Scott and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing

How we handle bath re-enamelling in Acton Scott
We do not move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the day after. We work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are worn patches where water runs and sits and an original cast iron bath that needs restoring.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

- Where
- Acton Scott (SY6)
- Area hub
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What happens on the day
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- One price list for the whole UK
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- A fixed quote before booking
Read our full price list and resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- How many areas need work
- The material and finish
- How many items we do on one visit
- Unusual colours or finishes
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Two or three clear photos are generally enough. Try to include:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- The material, if you know it
- Daylight if possible, and no flash reflection
Most clients in Acton Scott get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What we are called out for in Acton Scott
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
Common reasons people in Acton Scott contact us are:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Comparing quotes
- The length of the guarantee and what it covers
- What protection goes down before work starts
- How soon you can use it again
- Whether a trained technician does the job
Landlords, agents and businesses in Acton Scott
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Acton Scott, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
FAQs for Acton Scott
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Acton Scott?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SY6 postcode.
About Acton Scott
Acton Scott is about 15 miles south of Shrewsbury, in Shropshire. We visit homes and businesses in Acton Scott and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Acton Scott to Birmingham (38 miles away).
Our visits in SY6 work the same way as everywhere else we cover. Neighbouring places we cover include Little Stretton (2 miles north-west), Upper Affcot (2 miles south), Hope Bowdler (2 miles north-east), Leamoor Common (2 miles south-west) and Church Stretton (3 miles north). Within a short drive, we also cover Shrewsbury (15 miles north), Coleham (14 miles north), Ludlow (10 miles south-east), Kingsland (14 miles north), Belle Vue (14 miles north) and Monkmoor (15 miles north).
Landmarks near Acton Scott
Typical jobs here are in homes near Church of St Margaret and the streets around them. The nearest railway station is Church Stretton station, about 2.5 miles north of the centre. A little further out are South Shropshire (0.6 miles south-west) and Acton Scott Heritage Farm (under half a mile north-east). Open spaces near Acton Scott include Callow Hill.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Places near Acton Scott
Also in Acton Scott
About our accreditations · Every repair comes with a one-year guarantee.

