Perth and Kinross · Scotland
Bath Re-enamelling for Almondbank homes
Bath re-enamelling in Almondbank without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Our work in Almondbank
Almondbank is about 3 miles north-west of Perth, in Perth and Kinross. Wherever you are in the PH1 postcode area, we carry out the work at your property. We cover 107 places in Perth and Kinross. We work right across the region, from Almondbank to Edinburgh (35 miles away).
We cover every part of the PH1 postcode area and the streets around it. Jobs here include addresses on Main Street, College Mill Road and Roman Road and the roads around them. We also cover the places around Almondbank: Pitcairngreen (1 mile north), Ruthvenfield (1 mile south-east), Huntingtower (1 mile south-east), Tibbermore (2 miles south-west) and Hillyland (2 miles south-east). Within a short drive, we also cover Perth (3 miles south-east), Blairgowrie and Rattray (14 miles north-east), Crieff (13 miles west), Auchterarder (11 miles south-west), Kinross (15 miles south) and Scone (4 miles east).
Around Almondbank
Our customers here include homes close to Bertha Park High School and St Serf's Church, among other places. For rail, the closest station is Perth station, about 3.5 miles south-east of the centre. Other landmarks nearby include St John's Shopping Centre (3.6 miles south-east) and Huntingtower Castle (1.2 miles south-east). For a walk, there’s Mailer Hill and Dupplin Lake.
Bath re-enamelling in Almondbank, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include wear marks under the taps and a roll-top that’s seen better days, on Victorian roll-tops, basins & shower trays and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee in Almondbank and across Perth and Kinross.
- Area
- Almondbank (PH1)
- County
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Almondbank
Also in Almondbank
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Common problems we fix in Almondbank
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed any of these:
- Several chips and rust patches
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Comparing quotes
- How soon you can use it again
- Aftercare advice
- Whether the price is fixed and includes VAT
- Who turns up on the day
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- The material and finish
- How hard the colour is to match
- Access to the area
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Almondbank. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Where you are, by postcode
- Natural light rather than flash
- One sharp close-up of the damage
- The material, if you know it
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Why us?
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- A fixed quote before booking
Take a look at our prices page or resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Honest limits
A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Almondbank
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Your questions about bath re-enamelling in Almondbank
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
How it works
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
For a price in Almondbank, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
