Gloucestershire · England
Bath re-enamelling & resurfacing in Arlington, Gloucestershire
We travel to Arlington for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
How to look after the repair
After the repair has cured, a few habits help it last:
- Do not use the bath until it has fully cured
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Bath re-enamelling at your home in Arlington
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you are dealing with brown or grey marks that don’t clean off and worn patches where water runs and sits, we can help.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Arlington (GL7)
- Area hub
- Gloucestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Arlington
More services for Arlington
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
Materials we work on in Arlington
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Arlington. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colour mixed on the day to match
- Generally one visit, start to finish
- No need to remove anything
- Rooms protected and left tidy
Take a look at our pricing and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- Doing more than one item at once
- How many areas need work
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- Any details about the material
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say immediately whether it can be repaired.
FAQs for Arlington
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
Do you cover Arlington?
We do. We send a technician to Arlington for every job, and the price is the same as everywhere else.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know about parking or access
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
What we are called out for in Arlington
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
Typical reasons for a call-out include:
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
Questions to ask before booking
- How long it needs to cure
- How the colour is matched
- A fixed price, and whether VAT is included
- What protection goes down before work starts
Arlington and the surrounding area
Arlington is about 6 miles north-east of Cirencester, in Gloucestershire. Our repair technicians come to customers in Arlington, so you do not need to take anything anywhere. We cover all 470 towns and villages across Gloucestershire. We work right across the region, from Arlington to Birmingham (about 49 miles away).
Every address in GL7 is within our area, from the main roads to the quietest streets. From Awkward Hill and Hawkers Hill or anywhere nearby, a technician can come to you. Close by, we cover Bibury (1 mile south-east), Winson (2 miles north-west), Quenington (2 miles south-east), Sunhill (3 miles south) and Poulton (4 miles south). We also work in nearby towns such as Cheltenham (14 miles north-west), St Paul's (14 miles north-west), Cirencester (6 miles south-west), Lansdown (14 miles north-west), Fairview (14 miles north-west) and Brockworth (15 miles north-west).
Around Arlington
Locally, our jobs take us to homes close to Swan Hotel, Bibury Church of England Primary School and Church of St Mary, among other places. Other landmarks nearby include Arlington Mill Museum (within half a mile north-west).
About our accreditations · Every repair comes with a one-year guarantee.
