Gloucestershire · England
Bath Re-enamelling for Quenington homes
Damaged bath in Quenington? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Thin, worn enamel in places
Bath re-enamelling at your home in Quenington
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We’re frequently asked to fix a dull, rough surface that won’t come clean and staining under the taps and around the waste, across Victorian roll-tops, cast iron baths and pressed steel baths.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Quenington (GL7)
- County
- Gloucestershire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Do you need bath re-enamelling in Quenington?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What to look for in a quote
- Aftercare advice
- What preparation is included
- How the room is protected while they work
- The length of the guarantee and what it covers
What we can’t put right
We would rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Quenington
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
See our full price list and resurfacing vs replacement cost guide.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What kind of damage it is
- Access to the area
- The colour and finish to match
- Whether old repairs or coatings need taking off
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
Two or three clear photos are typically enough. Try to include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Where we work around Quenington
Quenington is about 8 miles east of Cirencester, in Gloucestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 470 places in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 51 miles away.
Jobs in GL7 are booked in the same way as anywhere else. That includes homes on Church Road, Mawley Road and Springfield Road. Close by, we cover Sunhill (2 miles south-west), Fairford (2 miles south), Bibury (2 miles north-west), Horcott (2 miles south) and Arlington (2 miles north-west). Within a short drive, we also cover Cirencester (8 miles west), Charlton Park (15 miles north-west), Bourton-on-the-Water (10 miles north), Battledown (15 miles north-west), Chesterton (8 miles west) and South Cerney (8 miles south-west).
Landmarks near Quenington
In Quenington, that means homes near The Keepers Arms, Church of St Swithin and Farmor's School. Further afield, we also cover the area around Arlington Mill Museum (2.6 miles north-west).
Nearby places to Quenington
Also in Quenington
Questions from Quenington
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How do I get a price for bath re-enamelling in Quenington?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your GL7 postcode.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. Allow most of the day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
How to get a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
