Highland · Scotland
Bath Re-enamelling in Ballifeary
Full bath re-enamelling and resurfacing at your home in Ballifeary, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
Bath re-enamelling in Ballifeary, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a coating lifting around the plughole and brown or grey marks that don’t clean off, we can usually put it right, on acrylic baths, basins & shower trays and pressed steel baths alike.
We stand behind the work with a one-year guarantee.
- Area
- Ballifeary (IV3, IV1, IV2)
- Region
- Highland
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Once the work has cured, treat it gently:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why Ballifeary clients choose us
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
Take a look at our full price list or bath cost comparison.
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a full day. We leave the room clean and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Ensure the area is dry
- Keep a parking space free if you can
How to get a price
Upload a photo of the damage and one of the entire item, with your IV3 postcode, and we’ll come back with a fixed quote.
Advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
More services for Ballifeary
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- How much damage there is
- What kind of damage it is
- Any earlier repairs that need removing first
- Access to the area
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- The material, if you know it
- Details of any past repairs
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Honest limits
A repair isn’t right for every job, for example:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Ballifeary
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Our work in Ballifeary
Ballifeary is about 1 mile west of Inverness, in Highland. Across the IV3 area, we carry out the work at your property. Ballifeary is one of 253 towns and villages in Highland where we work.
We work across the IV3, IV1 and IV2 postcode area. Whether you live on Park Road, Bught Lane and Bught Road or anywhere nearby, we can come to you. We also travel to Inverness (1 mile east), Lochardil (1 mile south-east), Hilton (1 mile east), Merkinch (1 mile north) and Crown (1 mile north-east). Larger places within reach include Cradlehall (4 miles east), Dingwall (12 miles north-west), Muir of Ord (9 miles north-west), Fortrose (9 miles north-east), Conon Bridge (10 miles north-west) and Beauly (8 miles west). If you are somewhere remote, ring us first and we will plan the trip.
Near you in Ballifeary
In Ballifeary, that means homes near Maple Court Hotel, Ness Bank Church and Cavell Gardens. The closest station to Ballifeary is Inverness station, roughly 1.1 miles north-east. Nearby you’ll also find Royal Northern Infirmary (less than half a mile north-east) and Inverness Museum and Art Gallery (0.8 miles north-east). Open spaces near Ballifeary include Tomnahurich and Loch Dochfour.
Landlord and trade work in Ballifeary
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Ballifeary: your questions answered
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
What happens next?
We review the photos and send a fixed quote.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do you cover the whole of Highland?
The whole UK, including all of Highland. Send your postcode with your pictures and we’ll confirm dates.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Highland.
About our accreditations · Every repair comes with a one-year guarantee.
