Cheshire West and Chester · England
Bath Re-enamelling for Broxton homes
Bath re-enamelling across Broxton and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Where we work around Broxton
Broxton is about 9 miles east of Wrexham, in Cheshire West and Chester. Whether you are in the middle of Broxton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. Our nearest city page is Liverpool, about 23 miles away.
Postcode districts we cover here: CH3. Close by, we cover Barnhill (1 mile north-east), Clutton (1 mile west), Brown Knowl (1 mile east), Fuller's Moor (1 mile east) and Larkton (1 mile south-east). Within a short drive, we also cover Chester (9 miles north-west), Ellesmere Port (15 miles north-west), Winsford (13 miles north-east), Boughton (8 miles north-west), Frodsham (15 miles north) and Hoole (9 miles north-west).
Landmarks near Broxton
Around Broxton, we work in homes near Egerton Arms and Clutton Church of England Primary School, among other places. Well-known places in the area include Museum of Amusements (2.8 miles north) and Bolesworth Castle (1.5 miles north-east). Open spaces near Broxton include Bickerton Hill.
Bath re-enamelling at your home in Broxton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off, we can typically put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Broxton (CH3)
- Area hub
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Broxton
What else we do in Broxton
Repairing versus replacing in Broxton
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
What you get with us
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Colour mixed on the day to match
See our full price list or guide to resurfacing and replacement costs.
FAQs for Broxton
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I get a price for bath re-enamelling in Broxton?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Are there extra charges for Broxton?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What happens after I send pictures?
You will get a fixed quote back, plus dates. There’s no obligation to book.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Respect the curing time we give you
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Honest limits
In fairness, some problems need a different fix:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- How easy the damage is to reach
- The size and number of damaged areas
- How hard the colour is to match
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
When to call us in Broxton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The things clients normally mention when they call are:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
What to look for in a quote
- Whether they match the colour on site
- The length of the guarantee and what it covers
- Aftercare advice
- If travel is included in the price
Landlord and trade work in Broxton
We carry out planned and one-off repairs for housing associations and facilities teams in Cheshire West and Chester and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Get a quote
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Broxton, and we’ll reply with a fixed price.
Related advice
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
