Nottingham · England

Bath re-enamelling & resurfacing in Basford, Nottingham

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Basford. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Basford

When we’d advise against a repair

We’d rather lose a job than do one that will not last, so these are the limits:

  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

Bath re-enamelling in Basford without replacing anything

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are brown or grey marks that don’t clean off and a coloured bath you want in white.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Basford (NG7, NG5, NG6)
County
Nottingham
Guarantee
A year, on every repair
Price
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Basford and the surrounding area

Basford is about 1 mile north of Nottingham, in Nottingham. Wherever you are in the NG7 postcode area, we carry out the work at your property. Basford is one of 51 towns and villages in Nottingham we cover. We work right across the region, from Basford to Birmingham (46 miles away).

Every address in NG7, NG5 and NG6 is within our area. Streets in the area include Zulu Road, Mayo Road and Egypt Road, all of which we cover. Neighbouring places we cover include New Basford (1 mile south-east), Old Basford (1 mile west), Sherwood Rise (1 mile south-east), Nottingham (1 mile south) and Carrington (1 mile south-east). We also work in nearby towns such as Clifton (5 miles south), Compton Acres (4 miles south), Wollaton (3 miles south-west), Ruddington (6 miles south), The Meadows (3 miles south) and Westville (4 miles north-west).

Landmarks near Basford

Locally, our jobs take us to homes close to The White Swan pub, St. Leodegarius Church and Djanogly Northgate Academy and the streets around them. You’ll also find Nottingham Free School (within half a mile east), Henry Mellish School and Specialist Sports College (1.4 miles north-west) and Forest Recreation Ground (1 mile south). Basford’s nearest station is Bulwell station, about 1.9 miles north-west. Other landmarks nearby include Victoria Centre (1.7 miles south-east) and Nottingham Castle (2.1 miles south). The countryside around Basford includes Colwick Woods and Wilford Hill.

  • Local facilities include North Wilford (2.8 miles south)
Map of Basford © OpenStreetMap contributors

What affects the price in Basford

Prices start from £350. We price every job individually. What matters most is:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Doing more than one item at once
  • How easy the damage is to reach

Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send photos for a quote

You can normally get a fixed quote without us visiting. To help us price it:

  • Something in shot to show the size
  • The postcode, so we can plan the visit
  • Details of any past repairs
  • A clear, close picture of the problem area

The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Repairing versus replacing in Basford

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • One price list for the whole UK
  • We come to you, anywhere in the UK

Read our full price list or bath cost comparison.

The process

Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. The bath is left to cure and can usually be used the next day.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Plan for the room to be out of bounds to pets and children
  • Let us know if it has been repaired before

Get a quote

If you are in Basford and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Related advice

FAQs for Basford

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Do you work in Basford?

Yes. We cover the entire UK and travel to Basford and the rest of Nottingham. Send photos and we’ll quote, or call 0345 017 0787.

Will there be fumes?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

Are there extra charges for Basford?

There’s no separate call-out charge. Your fixed quote includes everything.

How long will the bath be out of use?

Most baths are done in a day, ready the following day. We give you timings with the quote.

Can you make a coloured bath white?

Yes, most people go for white. Mention the colour you want when you send pictures.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

When to call us in Basford

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

The things customers usually mention when they call include:

  • A coloured bath you want in white
  • A coating lifting around the plughole
  • A roll-top that is seen better days
  • Lots of chips and rust spots

What your quote should include

  • Whether the colour is mixed to match
  • The length of the guarantee and what it covers
  • What happens if they find more damage
  • Whether there are any call-out or travel charges

Choosing a repair company

Keeping it looking good

Much of the damage we repair could have been avoided. These habits help:

  • Get any chip repaired quickly
  • Fix dripping taps quickly
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

DIY kit or professional repair?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.