Greater London · England
Bath Re-enamelling for Battersea homes
Bath re-enamelling for Battersea, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that do not clean off
How we handle bath re-enamelling in Battersea
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for stains that won’t shift and lots of chips and rust spots, across basins & shower trays, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Area
- Battersea (SW11, SW18, SW4)
- County
- Greater London
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Battersea
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Greater London.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Also in Battersea
Where we work around Battersea
Battersea is about 3 miles south-east of Kensington, in Greater London. We travel to homes and businesses in Battersea, so nothing has to leave your home. Battersea is one of 764 places in Greater London where we work.
We work across the SW11, SW18 and SW4 postcode area and the streets around it. Jobs here include addresses on York Road, Este Road and Home Road and the roads around them. With the A3207 close by, Battersea is easy for our technicians to reach. Nearby, we also work in Clapham Junction (1 mile north-west), Sands End (1 mile north-west), Chelsea Harbour (1 mile north-west), Wandsworth (1 mile south-west) and Clapham (1 mile east). Within a short drive, we also cover London (4 miles north-east), City of Westminster (4 miles north), Marylebone (4 miles north), Kensington (3 miles north-west), St Pancras (5 miles north-east) and Shoreditch (6 miles north-east).
Local landmarks in Battersea
We visit homes around The Falcon pub, Imperial Park and Emanuel School, among other places. Other local landmarks include Clapham Welsh Presbyterian Church (less than half a mile south-east), Thames Christian College (0.5 miles north-west) and Christ Church CofE Primary School (less than half a mile north). There’s a railway station in Battersea itself: Clapham Junction station. A little further out are Soseki Museum (0.9 miles east) and Streatham Hill (2.5 miles south-east). Green spaces nearby include Henman Hill and Battersea Park Lake.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Have chips seen to early
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Advice
Honest limits
A repair is not right for every job, for example:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
When to call us in Battersea
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Several chips and rust patches
Before booking anyone
- How changes to the job are handled
- When it can be used again
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
What affects the price in Battersea
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed quote
Phone pictures are fine. Make sure they show:
- A picture taken from further back
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Landlords, agents and businesses in Battersea
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
If you manage property in Battersea, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
About our accreditations · Every repair comes with a one-year guarantee.
