Greater London · England
Bath re-enamelling & resurfacing in Sands End, Greater London
Fixed-price bath re-enamelling in Sands End and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Wear marks under the taps
- An old resurfacing that’s failing
Signs you need bath re-enamelling in Sands End
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Contact us if you’ve noticed:
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A coating lifting around the plughole
Before you book anyone
- Whether the price is fixed and includes VAT
- How to care for the finish
- Whether there are any call-out or travel charges
- What prep work is covered
Bath re-enamelling in Sands End, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s stains that won’t shift and a roll-top that’s seen better days, we can usually put it right, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Sands End (SW11, SW6, SW10)
- Region
- Greater London
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we work on in Sands End
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
- Never use suction bath mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Why repair rather than replace?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- A fixed quote before you book
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Take a look at our pricing and guide to resurfacing and replacement costs.
Sands End and nearby
Sands End is about 2 miles south-west of Brompton, in Greater London. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 764 places in Greater London.
Our technicians cover all of the SW11, SW6 and SW10 postcode area and the streets around it. That includes homes on York Road, Lots Road and Hyde Lane and the roads around them. Close by, we cover Chelsea Harbour (1 mile north), Walham Green (1 mile north-west), World's End (1 mile north), Clapham Junction (1 mile south-east) and Little Chelsea (1 mile north). Further out, we also cover London (4 miles north-east), City of Westminster (3 miles north), Marylebone (3 miles north-east), St Pancras (5 miles north-east), Shoreditch (6 miles north-east) and Walthamstow (10 miles north-east).
Local landmarks in Sands End
Locally, our jobs take us to homes close to Heatherley School of Fine Art, Natural History Museum Library and Archives and Falconbrook Primary School. You will also find Raven Inn (under half a mile north-east), Imperial Park (less than half a mile south-west), St Mary's Church (within half a mile north-east) and Chelsea Academy (under half a mile north). There is a railway station in Sands End itself: Imperial Wharf station. Other landmarks nearby include Southside Wandsworth (1.4 miles south-west) and Westminster St Margaret and St John (2.7 miles north-east). Green spaces nearby include Campden Hill and WWT London Wetland Centre.
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Sands End: your questions answered
Are there extra charges for Sands End?
We don’t add a call-out fee. Your fixed price includes everything.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there any odour?
There may be a mild smell during the work.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What affects the price in Sands End
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Access to the area
- Whether we combine several jobs
- The size and number of damaged areas
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Natural light rather than flash
For a price in Sands End, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Also near Sands End
What else we do in Sands End
About our accreditations · Every repair comes with a one-year guarantee.
