Greater London · England
Bath re-enamelling & resurfacing in Chelsea Harbour, Greater London
Bath re-enamelling in Chelsea Harbour without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
When we would advise against a repair
It helps to know what we cannot do:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our bath re-enamelling in Chelsea Harbour
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We’re often asked to fix an old resurfacing that’s failing and thin, worn enamel in places, in pressed steel baths, Victorian roll-tops and basins & shower trays.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Location
- Chelsea Harbour (SW6, SW11, SW10)
- Region
- Greater London
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we are called out for in Chelsea Harbour
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted any of these:
- A roll-top that’s seen better days
- Wear marks under the taps
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- Whether the colour is mixed to match
Chelsea Harbour questions
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- A fixed quote before booking
Take a look at our prices page and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Chelsea Harbour
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
If you manage property in Chelsea Harbour, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Chelsea Harbour and nearby
Chelsea Harbour is about 2 miles south-east of Kensington, in Greater London. Customers in Chelsea Harbour get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We cover 764 places in Greater London.
Jobs in SW6, SW11 and SW10 are booked in the same way as anywhere else. We regularly work on streets such as Ann Lane, York Road and Lots Road and the roads around them. We also cover the places around Chelsea Harbour: Sands End (1 mile south), Walham Green (1 mile north-west), World's End (1 mile north), Little Chelsea (1 mile north) and Parsons Green (1 mile west). We also work in nearby towns such as London (4 miles north-east), City of Westminster (3 miles north-east), Marylebone (3 miles north-east), St Pancras (4 miles north-east), Shoreditch (6 miles north-east) and Walthamstow (10 miles north-east).
What’s near Chelsea Harbour
In Chelsea Harbour, that means homes near Imperial Park, Chelsea Academy and Heatherley School of Fine Art and the streets around them. You’ll also find Langford Primary School (under half a mile south-west), Natural History Museum Library and Archives (1.5 miles north), St Mary's Church (under half a mile east) and Lots Road pub (less than half a mile north-west). There is a railway station in Chelsea Harbour itself: Imperial Wharf station. Well-known places in the area include Chelsea Stadium Tour And Museum (0.6 miles north-west) and Chelsea and Westminster Hospital (0.6 miles north). Not far away are WWT London Wetland Centre and Battersea Park Lake.
- Parks and local facilities nearby include Westminster St Margaret and St John (2.6 miles north-east)
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The size and number of damaged areas
- Access to the area
- What the surface is made of
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Chelsea Harbour. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- One picture of the entire bath
- What it’s made of, if you know
- Where you are, by postcode
Send us photos of the damage and a wider shot of the whole item, and tell us you are in Chelsea Harbour, and we’ll come back with a fixed quote.
Nearby places to Chelsea Harbour
What else we do in Chelsea Harbour
About our accreditations · Every repair comes with a one-year guarantee.
