Coventry · England
Bath re-enamelling & resurfacing in Beechwood, Coventry
Fixed-price bath re-enamelling in Beechwood and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- An old resurfacing that is failing
- A roll-top that is seen better days
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling at your home in Beechwood
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people get in touch are several chips and rust patches and a roll-top that’s seen better days.
Every repair is covered by our one-year guarantee, wherever you are in Coventry.
- Location
- Beechwood (CV7)
- County
- Coventry
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Beechwood
More services for Beechwood
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Covering Beechwood
Beechwood is about 4 miles north-west of Kenilworth, in Coventry. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Beechwood is one of 88 towns and villages in Coventry we cover. You can also see our page for Birmingham, about 13 miles away.
We cover every part of CV7 and the streets around it. From Hodgett's Lane and Waste Lane or a nearby road, we can come to you. Nearby, we also work in Carol Green (1 mile north), Burton Green (1 mile south-east), Balsall Common (1 mile west), Meer End (2 miles south-west) and Fen End (3 miles south-west). We also work in nearby towns such as Coventry (5 miles east), Hillfields (5 miles east), Bishopsgate Green (5 miles east), Radford (5 miles east), Ernesford Grange (7 miles east) and Foleshill (7 miles north-east).
What’s near Beechwood
Typical jobs here are in homes near Heart of England School, Tile Hill Wood School and Burton Green Church of England Academy and the streets around them. The closest station to Beechwood is Tile Hill station, about 0.9 miles east. A little further out are Ford's Hospital (4.7 miles east) and Allesley Castle (3 miles north-east). The countryside around Beechwood includes Oxpen Meadow Lake.
Work for landlords and builders
For anyone letting property in or around Beechwood, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- What the surface is made of
- How many areas need work
- Where the damage is and how we get to it
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- Something in shot to show the size
- Where you are, by postcode
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Questions from Beechwood
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Beechwood.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
When to call us in Beechwood
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Get in touch if you’ve noticed:
- Lots of chips and rust spots
- An old resurfacing that is failing
- Stains that will not shift
- Thin, worn enamel in places
What your quote should include
- What preparation is included
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- What protection goes down before work starts
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Open a window if you can
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
