Wiltshire · England
Bath re-enamelling & resurfacing in Wilton, Wiltshire
Our technicians come to Wilton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that is failing
How we handle bath re-enamelling in Wilton
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a bath in a colour that no longer suits and chips and rust in more than one place, on acrylic baths, cast iron baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months in Wilton and everywhere else. If something goes wrong with the work, we come back.
- Location
- Wilton (SP2)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Any earlier repairs that need removing first
- Doing more than one item at once
- How many areas need work
- The colour and finish to match
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- A photo taken from further back
- Your postcode, so we can check dates
- Details of any past repairs
- Good light, ideally daylight, without flash glare
Upload pictures of the damage and a wider shot of the entire item, with your SP2 postcode, and we’ll come back with a fixed quote.
Wilton questions
Can you quote from photos?
In nearly every case. If photos do not show enough, we will ask for another angle.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Are there extra charges for Wilton?
Travel is included in the price, with the same prices everywhere we work.
Which areas do you work in?
We work UK-wide, so Wilton is covered. Our prices are the same everywhere.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
How do I get a price for bath re-enamelling in Wilton?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Keeping it looking good
It’s all simple stuff:
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
About Wilton
Wilton is about 3 miles west of Salisbury, in Wiltshire. We visit clients in Wilton, so you don’t need to take anything anywhere. Wilton is one of 425 towns and villages in Wiltshire we cover.
We work across the SP2 postcode area and the streets around it. We regularly work on streets such as Kingsbury Square, North Street and Churchill Court. Main roads around Wilton include the A30 and A36, so getting to you is simple. We also travel to Fugglestone St Peter (1 mile east), Quidhampton (1 mile east), Netherhampton (2 miles south-east), Bemerton (2 miles east) and Stratford sub Castle (3 miles east). Further out, we also cover Salisbury (3 miles east), Amesbury (7 miles north-east), Bugmore (3 miles east), Milford (4 miles east), Old Sarum (4 miles north-east) and Harnham (3 miles south-east).
Around Wilton
We visit homes around Wilton CofE Primary School, Sarum Academy and St Mary's Church, among other places. Also close by are The Pembroke Arms (less than half a mile south-east) and Wilton House gardens (1.1 miles south). For rail, the closest station is Salisbury station, about 2.5 miles east. Well-known places in the area include Salisbury (3 miles east) and Wilton Royal Carpet Factory Museum (under half a mile south-east). For a walk, there is Baverstock Juniper Bank and Harnham Hill.
Landlords, agents and businesses in Wilton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Common problems we fix in Wilton
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
You may need us if you’ve spotted:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- Worn patches where water runs and sits
- Stains that won’t shift
Before you book anyone
- Whether there are any call-out or travel charges
- What happens if they find more damage
- Whether they match the colour on site
- What aftercare is recommended
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
- Let us know about parking or access
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Read more
Also near Wilton
Also in Wilton
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we work on in Wilton
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
