Flintshire · England
Bath Re-enamelling in Berthengam
Full bath re-enamelling and resurfacing in Berthengam, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A dull, rough surface that won’t come clean
Covering Berthengam
Berthengam is about 4 miles south-east of Prestatyn, in Flintshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Berthengam is one of 139 towns and villages in Flintshire we cover. Our jobs stretch from Berthengam to Liverpool (18 miles away).
We cover every part of the CH8 postcode area and the streets around it. If you are just outside Berthengam, we cover Trelogan (1 mile north), Marian (1 mile west), Trelawnyd (2 miles west), Picton (2 miles north) and Pen-y-ffordd (2 miles north-east). Further out, we also cover Connah's Quay (12 miles south-east), Buckley (14 miles south-east), Bwcle (14 miles south-east), Flint (9 miles south-east), Mold (12 miles south-east) and Holywell (5 miles south-east).
Local landmarks in Berthengam
Around Berthengam, we work in homes near Ysgol Gynradd Trelogan and Afon Goch pub. The closest station to Berthengam is Prestatyn station, about 3.9 miles north-west of the centre. Further afield, we also cover the area around Prestatyn Community Hospital (3.4 miles north-west) and Bryn Castell (under half a mile west). Not far away are Llyn Helyg and Bryn-yr-odyn.
Bath re-enamelling at your home in Berthengam
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with an original cast iron bath that needs restoring and lots of chips and rust spots, we can usually put it right, on pressed steel baths, Victorian roll-tops and acrylic baths alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Where
- Berthengam (CH8)
- County
- Flintshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
A repair isn’t right for every job, for example:
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What we’re called out for in Berthengam
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Look out for any of the following:
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- Stains that will not shift
- Chips and rust in more than one place
Before booking anyone
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- What preparation is included
- Whether a trained technician does the job
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Common questions in Berthengam
Is there any odour?
Expect a mild smell while we’re working.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you cover the whole of Flintshire?
Across the UK, so Berthengam is covered. Prices don’t change with location.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your CH8 postcode.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Landlord and trade work in Berthengam
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Repairing versus replacing in Berthengam
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Berthengam. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Generally one visit, start to finish
- Straight answers about what a repair can do
- No need to remove anything
- Dust sheets down, tidy finish
Take a look at our full price list or bath cost comparison.
Looking after it afterwards
So the finish stays in good condition:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What else we do in Berthengam
About our accreditations · Every repair comes with a one-year guarantee.
