Flintshire · England
Bath re-enamelling & resurfacing in Picton, Flintshire
Full bath re-enamelling and resurfacing at your home in Picton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
About our bath re-enamelling in Picton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair pressed steel baths, basins & shower trays and Victorian roll-tops, and people most often call us about a period or roll-top bath worth keeping and a bath in a colour that no longer suits.
Big or small, it’s backed by a one-year guarantee in Picton and across Flintshire.
- Location
- Picton (CH8)
- Region
- Flintshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
In fairness, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Landlord and trade work in Picton
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- Where the damage is and how we get to it
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- Any details about the material
- Your postcode, so we can check dates
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
What else we do in Picton
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Picton clients choose us
- Honest advice, even when it means no job
- No extra charge for your area
- Everything repaired in place
- One visit for most repairs
Take a look at our pricing or bath cost comparison.
Where we work around Picton
Picton is about 4 miles east of Prestatyn, in Flintshire. Clients in Picton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover all 139 towns and villages across Flintshire. Our jobs stretch from Picton to Liverpool (17 miles away).
Postcode districts we cover here: CH8. We also cover the places around Picton: Glasdir (1 mile east), Tanlan (1 mile north-east), Pen-y-ffordd (1 mile east), Gwespyr (1 mile north-west) and Llawndy (1 mile north). Larger places within reach include Connah's Quay (13 miles south-east), Buckley (14 miles south-east), Bwcle (15 miles south-east), Flint (10 miles south-east), Mold (13 miles south-east) and Holywell (5 miles south-east).
Landmarks near Picton
Locally, our jobs take us to homes close to The White Lion Inn, Ysgol Bryn Garth and Church of All Saints and the streets around them. Picton’s nearest station is Prestatyn station, roughly 3.8 miles west. A little further out are Prestatyn Community Hospital (3.5 miles west) and Bryn Castell (1.8 miles south-west). The countryside around Picton includes Llyn Helyg and Bryn-yr-odyn.
FAQs for Picton
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover the entire of Flintshire?
The entire UK, including all of Flintshire. Send your postcode with your pictures and we’ll offer you dates.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Do you come to Picton?
We do. We send a technician to Picton for every job, and the price is the same as everywhere else.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Keeping it looking good
How the surface is treated afterwards matters:
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Do not let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
