Sunderland · England

Bath Re-enamelling in Bishopwearmouth

Our technicians come to Bishopwearmouth for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • A dull, rough surface that won’t come clean
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Bishopwearmouth

How we handle bath re-enamelling in Bishopwearmouth

If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We work on cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are lots of chips and rust spots and a coloured bath you want in white.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Before and after: an old basin refinished to bright white
Location
Bishopwearmouth (SR1, SR2, SR4)
Area hub
Sunderland
Guarantee
12 months on all our work
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

What we are called out for in Bishopwearmouth

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Typical reasons for a call-out include:

  • A coating lifting around the plughole
  • Worn patches where water runs and sits
  • A bath that stays dull however much you clean it
  • Staining under the taps and around the waste

Questions to ask before booking

  • How long the guarantee is and what it covers
  • Who turns up on the day
  • What aftercare is recommended
  • What protection goes down before work starts

Our hiring checklist

Prices and what affects them

Prices start from £350. Every quote is fixed and free. What we look at:

  • The size and number of damaged areas
  • Whether we combine several jobs
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.

Quotes from your pictures

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • Any earlier repairs or coatings
  • Something in shot to show the size
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.

Repairing versus replacing in Bishopwearmouth

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Bishopwearmouth clients choose us

  • We leave the room as we found it
  • Same prices wherever you are
  • A fixed quote before booking
  • We come to you, anywhere in the UK

Read our full price list and bath cost comparison.

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Sunderland and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Common questions in Bishopwearmouth

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.

Is there a smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Can you price it without visiting?

Generally, yes. Clear pictures let us give you a fixed quote without visiting.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

Are there extra charges for Bishopwearmouth?

We don’t add a call-out fee. The fixed price covers the visit and the work.

When we would advise against a repair

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • A cast iron or steel bath that is cracked right through
  • Problems we can’t see until an old finish comes off
  • Plumbing leaks, which need a plumber

Send us photos and we’ll tell you honestly.

Materials we work on in Bishopwearmouth

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

How it works

Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes a full day, and we will keep you posted as we go.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available
  • Let us know which floor the room is on

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.

Get a fixed price

Advice

Where we work around Bishopwearmouth

Bishopwearmouth is about 1 mile north-east of Sunderland, in Sunderland. Jobs in Bishopwearmouth are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our technicians cover all 75 towns and villages across Sunderland, from the larger towns to small villages. Our jobs stretch from Bishopwearmouth to Newcastle upon Tyne (about 11 miles away).

Jobs in SR1, SR2 and SR4 work the same way as everywhere else we cover. Streets in the area include Park Lane, Burdon Road and Deptford Road, all of which we cover. Close by, we cover Sunniside (1 mile east), Hendon (1 mile south-east), Fulwell (2 miles north), Seaburn Dene (2 miles north) and Seaburn (2 miles north-east). Larger places within reach include Washington (6 miles west), Houghton-le-Spring (6 miles south-west), Hetton-le-Hole (6 miles south-west), New Silksworth (3 miles south), Farringdon (3 miles south-west) and Biddick Hall (5 miles north-west).

Local landmarks in Bishopwearmouth

Typical jobs here are in homes near Greens Public House, Sunderland Minster and Hudson Road Primary School, among other places. Nearby too are Mowbray Park (0.5 miles south-east), St Anthony's Girls' Catholic Academy (less than half a mile south) and Argyle House School (less than half a mile east). There is a railway station in Bishopwearmouth itself: Sunderland station. Other landmarks nearby include Sunderland Royal Hospital (0.8 miles west) and Hylton Castle (2.4 miles north-west). Green spaces nearby include Cleadon Hills and WWT Washington.

Map of Bishopwearmouth © OpenStreetMap contributors

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.