Staffordshire · England
Bath Re-enamelling for Blackshaw Moor homes
Bath re-enamelling in Blackshaw Moor without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Blackshaw Moor
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. Whether it’s thin, worn enamel in places and several chips and rust patches, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Blackshaw Moor and across Staffordshire.
- Location
- Blackshaw Moor (ST13)
- County
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
- Make sure the room can be ventilated
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Blackshaw Moor, and we will come back with a fixed quote.
Read more
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many areas need work
- Where the damage is and how we get to it
- How hard the colour is to match
- Whether we combine several jobs
Our prices are the same across the UK, with no extra for Blackshaw Moor. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- Any earlier repairs or coatings
- A picture taken from further back
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs straight away
- Store bottles off the bath
- Repair dripping taps early
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Blackshaw Moor and nearby
Blackshaw Moor is about 3 miles north-east of Leek, in Staffordshire. From the centre of Blackshaw Moor to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Blackshaw Moor is one of 512 places in Staffordshire where we work. You can also see our page for Manchester, about 25 miles away.
We cover every part of the ST13 postcode area. Neighbouring places we cover include Haregate (2 miles south-west), Ball Haye Green (2 miles south-west), Abbey Green (2 miles south-west), Leek (3 miles south-west) and Lowe Hill (3 miles south). Further out, we also cover Newcastle-under-Lyme (13 miles south-west), Longton (12 miles south-west), Biddulph (8 miles west), Alsager (14 miles west), Kidsgrove (11 miles west) and Cheadle (10 miles south).
Landmarks near Blackshaw Moor
Locally, our jobs take us to homes close to Ye Olde Rock Inn, Leek High School and Blackshaw Moor CofE (VC) First School, among other places. Other landmarks nearby include St Edward's Hospital (4.4 miles south-west) and Nicholson Institute and Leek College of Further Education (2.5 miles south-west). The countryside around Blackshaw Moor includes Merryton Low and Blakemere Pond.
Nearby places to Blackshaw Moor
What else we do in Blackshaw Moor
Common problems we fix in Blackshaw Moor
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Wear marks under the taps
What your quote should include
- What the guarantee covers, and for how long
- When it can be used again
- A fixed price, and whether VAT is included
- What preparation is included
FAQs for Blackshaw Moor
Are there extra charges for Blackshaw Moor?
There’s no separate call-out charge. Your fixed price includes everything.
Do you cover Blackshaw Moor?
Yes. We work across the UK and travel to Blackshaw Moor and the rest of Staffordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Blackshaw Moor.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Most jobs done in one visit
- Work done at your home or business
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Landlord and trade work in Blackshaw Moor
Housing associations and facilities teams use us for planned and reactive repairs in Staffordshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
