North Lanarkshire · Scotland
Bath Re-enamelling for Bogside homes
Full bath re-enamelling and resurfacing for homes and businesses in Bogside and across North Lanarkshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- A roll-top that is seen better days
Bath re-enamelling at your home in Bogside
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Whether it’s a period or roll-top bath worth keeping and a peeling or bubbling previous coating, we can typically put it right, on acrylic baths, cast iron baths and Victorian roll-tops alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Location
- Bogside (ML2)
- Area hub
- North Lanarkshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Bogside. The price depends on:
- How easy the damage is to reach
- The type of damage
- Whether old repairs or coatings need taking off
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
You can normally get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Details of any past repairs
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Also near Bogside
Other services in Bogside
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Aftercare tips
How the surface is treated afterwards matters:
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repair or replace: which is better?
A replacement often means several trades over several days. Re-enamelling is one technician, usually one day. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before booking.
Why Bogside clients choose us
- Rooms protected and left tidy
- One price list for the entire UK
- A fixed quote before booking
- Honest advice, even when it means no job
Take a look at our full price list or resurfacing vs replacement cost guide.
Questions from Bogside
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long does re-enamelling take?
Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Where we work around Bogside
Bogside is about 2 miles south-east of Wishaw, in North Lanarkshire. Wherever you are in the ML2 postcode area, we carry out the work at your property. We cover all 89 towns and villages in North Lanarkshire. You can also see our page for Glasgow, about 17 miles away.
Every address in ML2 is within our area, from the main roads to the quietest streets. Close by, we cover Chapel (1 mile north-east), Wildmanbridge (1 mile south), Morningside (1 mile north), Law (1 mile south-west) and Cambusnethan (1 mile north-west). We also work in nearby towns such as Motherwell (5 miles north-west), Cumbernauld (14 miles north), Coatbridge (9 miles north-west), Airdrie (8 miles north-west), Bellshill (7 miles north-west) and Burnfoot (9 miles north-west).
Around Bogside
Our customers here include homes close to Coltness High School, among other places. The closest station to Bogside is Wishaw station, about 2.3 miles west of the centre. Nearby you will also find Murdostoun Castle (2.1 miles north) and Law Hospital (0.6 miles south-east). The countryside around Bogside includes Baron's Haugh RSPB Reserve and Allanton House lake.
The process
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Ensure the room can be ventilated
Get a quote
Email us a picture of the damage and one of the entire item, with your ML2 postcode, and we will come back with a fixed quote.
Read more
Do you need bath re-enamelling in Bogside?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Most people get in touch after spotting one of these:
- A dull, rough surface that won’t come clean
- Stains that will not shift
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
What your quote should include
- How to care for the finish
- Who turns up on the day
- What happens if the damage is worse than the photos show
- Whether the price covers travel
About our accreditations · Every repair comes with a one-year guarantee.
