Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Boosbeck, Redcar and Cleveland
Full bath re-enamelling and resurfacing for homes and businesses in Boosbeck and across Redcar and Cleveland. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
What affects the price in Boosbeck
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Doing more than one item at once
- The colour and finish to match
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
If you’re in Boosbeck and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
How we handle bath re-enamelling in Boosbeck
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are an original cast iron bath that needs restoring and thin, worn enamel in places.
Big or small, you get the same one-year guarantee in Boosbeck and across Redcar and Cleveland.
- Where
- Boosbeck (TS12)
- Region
- Redcar and Cleveland
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
How the visit works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. It generally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Your questions about bath re-enamelling in Boosbeck
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What happens next?
You will get a fixed quote back, generally with dates to choose from. There is no obligation to book.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Places near Boosbeck
What else we do in Boosbeck
Where we work around Boosbeck
Boosbeck is about 3 miles east of Guisborough, in Redcar and Cleveland. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 48 towns and villages across Redcar and Cleveland, from the larger towns to small villages. Our jobs stretch from Boosbeck to Newcastle upon Tyne (40 miles away).
We work across TS12 and the streets around it. From High Street, Oldham Street and Oldham Close or anywhere nearby, a technician can come to you. Other places close to Boosbeck include Skelton Green (1 mile north), Margrove Park (1 mile south-west), Lingdale (1 mile south-east), Charltons (1 mile south-west) and Skelton-in-Cleveland (1 mile north). Further out, we also cover Redcar (5 miles north-west), Guisborough (3 miles west), Eston (7 miles west), Marske-by-the-Sea (4 miles north-west), Grangetown (7 miles west) and South Bank (8 miles west).
Around Boosbeck
Locally, our jobs take us to homes close to Church of St Aidan, Lockwood Primary School and Freebrough Academy, among other places. Boosbeck’s nearest station is Saltburn station, roughly 2.7 miles north. Other landmarks nearby include Guisborough Museum (2.9 miles west) and Skelton Castle (1.5 miles north). For a walk, there is Freebrough Hill.
Common problems we fix in Boosbeck
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Customers typically contact us about:
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What to look for in a quote
- Whether a trained technician does the job
- How changes to the job are handled
- How to look after the finish
- How long it needs to cure
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
Send us pictures and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Nothing taken out or refitted
Read our prices page or bath cost comparison.
Looking after it afterwards
It’s all simple stuff:
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs straight away
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
