Redcar and Cleveland · England
Bath re-enamelling & resurfacing in South Bank, Redcar and Cleveland
We travel to South Bank for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
See our prices page or bath cost comparison.
About our bath re-enamelling in South Bank
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include several chips and rust patches and staining under the taps and around the waste, across cast iron baths, basins & shower trays and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- South Bank (TS6)
- County
- Redcar and Cleveland
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in South Bank
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Send us a photo if you notice any of these:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- A coloured bath you want in white
Questions to ask before booking
- What preparation is included
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- How long the guarantee is and what it covers
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including South Bank. What changes the price is:
- Access to the area
- Doing more than one item at once
- The size and number of damaged areas
- The material and finish
Our prices are the same across the UK, so there is no premium for South Bank. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- Where you are, by postcode
- A picture taken from further back
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
If you are in South Bank and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
South Bank: your questions answered
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How do I get a price for bath re-enamelling in South Bank?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your TS6 postcode.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Our work in South Bank
South Bank is about 1 mile north-west of Eston, in Redcar and Cleveland. Our technicians come to customers in South Bank and nearby villages, so nothing has to leave your home. South Bank is one of 48 places in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 34 miles away.
We work across TS6 and the streets around it. Whether you live on Old Station Road, King Street and Edward Street or a nearby road, we can come to you. If you are just outside South Bank, we cover Thorntree (1 mile south-west), Grangetown (1 mile east), Eston (1 mile south-east), Normanby (2 miles south-east) and Netherfields (2 miles south). Within a short drive, we also cover Redcar (5 miles north-east), Guisborough (6 miles south-east), Marske-by-the-Sea (6 miles east), Skelton-in-Cleveland (8 miles east), Skelton (8 miles east) and Brotton (9 miles east). Being one of Redcar and Cleveland’s larger places, South Bank is somewhere we visit frequently.
What’s near South Bank
In South Bank, that means homes near South Bank Community Primary School, Church of St John the Evangelist and St Peter's Catholic Voluntary Academy and the streets around them. South Bank’s nearest station is South Bank station, roughly 0.5 miles north of the centre. Nearby you’ll also find St Luke's Hospital (2.3 miles south-west) and Cleveland Centre (2.5 miles west). Green spaces nearby include RSPB Salthome and Eston Nab.
Landlords, agents and businesses in South Bank
We carry out planned and one-off repairs for housing associations and facilities teams in Redcar and Cleveland and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Places near South Bank
Also in South Bank
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How it works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow most of the day, and we will tell you if anything changes.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Ensure the area is dry
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Read more
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
Aftercare is simple:
- Do not let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
- Have chips seen to early
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
