Redcar and Cleveland · England
Bath Re-enamelling for Margrove Park homes
Fixed-price bath re-enamelling in Margrove Park and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
Bath re-enamelling in Margrove Park, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for an original cast iron bath that needs restoring and stains that won’t shift, on basins & shower trays, pressed steel baths and Victorian roll-tops.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Margrove Park (TS12)
- County
- Redcar and Cleveland
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Margrove Park. The price comes down to:
- How much damage there is
- Whether old repairs or coatings need taking off
- The material
- What kind of damage it is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- One picture of the whole bath
- Where you are, by postcode
- A close-up of the damage, in focus
- The material, if you know it
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- No need to remove anything
- Rooms protected and left tidy
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
Read our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Open a window if you can
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Margrove Park and the surrounding area
Margrove Park is about 3 miles east of Guisborough, in Redcar and Cleveland. From the centre of Margrove Park to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 48 towns and villages in Redcar and Cleveland, from the larger towns to small villages. Our jobs stretch from Margrove Park to Newcastle upon Tyne (about 41 miles away).
Here we cover the TS12 postcode area. Neighbouring places we cover include Charltons (1 mile south-west), Boosbeck (1 mile north-east), Lingdale (1 mile east), Stanghow (1 mile east) and Skelton Green (2 miles north). We also work in nearby towns such as Redcar (6 miles north-west), Guisborough (3 miles west), Eston (7 miles west), Marske-by-the-Sea (4 miles north), Grangetown (7 miles north-west) and Brotton (3 miles north-east).
Near you in Margrove Park
Our customers here include homes close to Church of St Aidan, Lockwood Primary School and Laurence Jackson School, among other places. Margrove Park’s nearest station is Commondale station, about 3.6 miles south. Well-known places in the area include Guisborough Museum (2.5 miles west) and Redcar Primary Care Hospital (5.7 miles north-west). Green spaces nearby include Freebrough Hill.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Store bottles off the bath
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What we cannot put right
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Margrove Park
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Margrove Park: your questions answered
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you come to Margrove Park?
Yes. We cover the whole UK and travel to Margrove Park and the rest of Redcar and Cleveland. Send us photos for a fixed quote, or call 0345 017 0787.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Redcar and Cleveland.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Towns and villages near Margrove Park
Also in Margrove Park
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, pictures and access details.
For anyone letting property in or around Margrove Park, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
