Stoke-on-Trent · England
Bath Re-enamelling in Boothen
Local bath re-enamelling for Boothen: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Landlords, agents and businesses in Boothen
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Boothen use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Bath re-enamelling at your home in Boothen
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. If you are dealing with a peeling or bubbling previous coating and stains that won’t shift, we can help, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Boothen (ST4)
- County
- Stoke-on-Trent
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- Fixed prices from your photos
- CHAS and Constructionline accredited
Take a look at our full price list or bath cost comparison.
Places near Boothen
More services for Boothen
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Boothen and the surrounding area
Boothen is about 2 miles south-west of Stoke-on-Trent, in Stoke-on-Trent. Wherever you are in the ST4 postcode area, we come to you. Our repair technicians cover 59 places in Stoke-on-Trent, from the larger towns to small villages. We work right across the region, from Boothen to Manchester (about 33 miles away).
Jobs in ST4 are booked in the same way as anywhere else. From Watson Road, Levita Road and Forber Road or a nearby road, we can come to you. Nearby, we also work in Sideway (1 mile south-east), Heron Cross (1 mile east), Fenton (1 mile east), Blurton (2 miles south-east) and Hanford (2 miles south). Within a short drive, we also cover Burslem (3 miles north), Tunstall (4 miles north), Smallthorne (4 miles north), Dimsdale (3 miles north-west), Porthill (3 miles north-west) and Birches Head (3 miles north).
Near you in Boothen
We visit homes around West End Methodist Church, St Joseph's Preparatory School and The Wellington Inn. Also close by are St. Joseph's College (0.6 miles south-west) and Stoke Minster CofE Primary Academy (less than half a mile north-east). The closest station to Boothen is Stoke-On-Trent station, about 1 mile north of the centre. Nearby you’ll also find North Staffordshire Royal Infirmary (0.8 miles north-west) and Minton Museum (0.5 miles north). The countryside around Boothen includes Hem Heath Woods and Westport Lake.
Questions from Boothen
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
How long will the bath be out of use?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Do you resurface freestanding baths?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
The process
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll tell you if anything changes.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
When to call us in Boothen
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for these signs:
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
- Several chips and rust patches
What your quote should include
- What aftercare is recommended
- Who turns up on the day
- How long it needs to cure
- Whether cleaning and preparation are in the price
Honest limits
Before booking, it’s worth knowing the limits:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- A wider photo showing the entire bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
