Wrexham · Wales
Bath re-enamelling & resurfacing in Bradley, Wrexham
Bath re-enamelling in Bradley without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
FAQs for Bradley
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
How much does bath re-enamelling cost in Bradley?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your LL11 postcode.
Are there extra charges for Bradley?
No. Our quotes include travel, and we charge the same wherever you are.
Do you work in Bradley?
Yes, we do. Repair technicians travel to Bradley from across the region, with no extra charge for travel.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
How we handle bath re-enamelling in Bradley
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a bath that stays dull however much you clean it and a peeling or bubbling previous coating, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee in Bradley and across Wrexham.
- Area
- Bradley (LL11)
- County
- Wrexham
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Common problems we fix in Bradley
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Stains that won’t shift
- A roll-top that’s seen better days
- Thin, worn enamel in places
- An old resurfacing that’s failing
Before you book anyone
- Who will actually do the work
- What the guarantee covers, and for how long
- What prep work is covered
- If travel is included in the price
Places near Bradley
Other services in Bradley
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Everything repaired in place
- Fixed prices from your photos
- Same prices wherever you are
See our full price list or bath cost comparison.
Our work in Bradley
Bradley is about 2 miles north-west of Wrexham, in Wrexham. Our repair technicians come to customers in Bradley, so nothing has to leave your home. Bradley is one of 115 places in Wrexham where we work. Our jobs stretch from Bradley to Liverpool (23 miles away).
All of LL11 is within our area. You will find streets such as Heol-y-Ffynnon, Alder Close and Park Wall Road. We also travel to Rhosrobin (1 mile south), Gwersyllt (1 mile south-west), Old Rhosrobin (1 mile south-east), Little Mountain (1 mile south-west) and Sydallt (1 mile north-west). Further out, we also cover Caia Park (3 miles south-east), Offa (3 miles south), Rhosllannerchrugog (5 miles south), The Dunks (3 miles south-east), Hightown (3 miles south) and Pentredŵr (5 miles south-west).
Landmarks near Bradley
Typical jobs here are in homes near Gwersyllt Community Primary School, Holy Trinity Church and Queens Head pub. Nearby too are Ysgol Bryn Alyn (0.7 miles west) and Ysgol Bryn Alyn (0.7 miles west). Bradley’s nearest station is Gwersyllt station, about 0.6 miles south-west of the centre. Further afield, we also cover the area around Tŷ Pawb (2.3 miles south) and Football Museum of Wales and Wrexham Museum (2.2 miles south). For a walk, there’s Wilderness Tip (Gresford) and The Flash.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We take into account:
- Access to the area
- The material and finish
- Unusual colours or finishes
- The size and number of damaged areas
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
How to get a fixed price
You can generally get a fixed price without us visiting. To help us price it:
- A close-up of the damage, in focus
- Something in shot to show the size
- Details of any past repairs
- Any details about the material
To get a price, send two or three photos through our quote form or call us. We will say right away whether it can be repaired.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
When a repair is not the answer
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- A bath split right through the body
- A bath that is rusted through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Get a quote
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
