Staffordshire · England
Bath Re-enamelling for Bradnop homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Bradnop. Free, fixed quotes from your photos.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
About our bath re-enamelling in Bradnop
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We regularly repair basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are brown or grey marks that don’t clean off and a dull, rough surface that won’t come clean.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Bradnop (ST13)
- Area hub
- Staffordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. A few tips:
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Avoid suction-cup mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Normally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Honest advice, even when it means no job
Take a look at our prices page or bath cost comparison.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Ask for a price
Most customers in Bradnop get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What we’re called out for in Bradnop
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people get in touch when they notice something like this:
- A roll-top that is seen better days
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Questions to ask before you book
- Aftercare advice
- Who will actually do the work
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What else we do in Bradnop
When a repair isn’t the answer
It helps to know what we can’t do:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
FAQs for Bradnop
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Are there extra charges for Bradnop?
No. Our quotes include travel, with the same prices everywhere we work.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
Our work in Bradnop
Bradnop is about 2 miles east of Leek, in Staffordshire. We visit clients in Bradnop, so you don’t need to take anything anywhere. We work in 512 places across Staffordshire, from the larger towns to small villages. Our jobs stretch from Bradnop to Manchester (28 miles away).
All of ST13 is covered. Local streets include School Lane and Ashbourne Road, all of which we cover. Close by, we cover Morridge Side (1 mile south-east), Onecote (2 miles east), Blakelow (2 miles south-east), Coltstone (3 miles south) and Ipstones (3 miles south). We also work in nearby towns such as Newcastle-under-Lyme (12 miles south-west), Longton (10 miles south-west), Stone (15 miles south-west), Biddulph (8 miles west), Alsager (13 miles west) and Kidsgrove (11 miles west).
Around Bradnop
In Bradnop, that means homes near Bradnop Church and Leek High School and the streets around them. Further afield, we also cover the area around St Edward's Hospital (2.5 miles south-west) and Nicholson Institute and Leek College of Further Education (1.8 miles north-west). Green spaces nearby include Coombes Valley RSPB reserve and Merryton Low.
About our accreditations · Every repair comes with a one-year guarantee.
