North Yorkshire · England
Bath Re-enamelling for Bland Hill homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Bland Hill. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
How we handle bath re-enamelling in Bland Hill
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the day after. Whether it’s staining under the taps and around the waste and a coating lifting around the plughole, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Bland Hill (HG3)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- What kind of damage it is
- What the surface is made of
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
Most quotes are done from pictures alone. To help us price it:
- The material, if you know it
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
When we would advise against a repair
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Questions from Bland Hill
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you work in Bland Hill?
Yes. We cover the entire UK and travel to Bland Hill and the rest of North Yorkshire. Send us photos for a fixed quote, or call 0345 017 0787.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Where we work around Bland Hill
Bland Hill is about 5 miles north of Otley, in North Yorkshire. Anywhere in HG3, a technician comes to you. Bland Hill is one of 626 towns and villages in North Yorkshire we cover. We work right across the region, from Bland Hill to Leeds (about 13 miles away).
All of HG3 is within our area, from the main roads to the quietest streets. Local streets include Broad Dubb Road and Brame Lane, and we cover them all. If you’re just outside Bland Hill, we cover Bramelane (1 mile north-west), Jack Hill (1 mile south-west), Lindley (3 miles south-east), Braythorn (3 miles south-east) and Farnley (3 miles south). Further out, we also cover Harrogate (6 miles east), Knaresborough (9 miles east), Skipton (14 miles west), Ripon (13 miles north-east), Starbeck (7 miles east) and Bilton (6 miles east).
Near you in Bland Hill
In Bland Hill, that means homes near The Sun Inn and Church of St Lawrence. Nearby you’ll also find Wharfedale Hospital (4.4 miles south) and John O'Gaunt's Castle (0.9 miles north-east). For a walk, there’s Great Alms Cliff.
When to call us in Bland Hill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Staining under the taps and around the waste
- A coloured bath you want in white
Before you book anyone
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in North Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Also in Bland Hill
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We will say straight away whether it can be repaired.
Read more
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs straight away
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
