North Yorkshire · England
Bath re-enamelling & resurfacing in Lund, North Yorkshire
Full bath re-enamelling and resurfacing at your home in Lund, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- Wear marks under the taps
When we would advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How we handle bath re-enamelling in Lund
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Our technicians work on pressed steel baths, acrylic baths and basins & shower trays, and people most frequently call us about lots of chips and rust spots and a bath that stays dull however much you clean it.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Lund (YO8)
- Region
- North Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Other services in Lund
Lund and the surrounding area
Lund is about 2 miles east of Selby, in North Yorkshire. Our technicians come to homes and businesses in Lund and nearby villages, so nothing has to leave your home. Lund is one of 626 places in North Yorkshire we cover. You can also see our page for Leeds, about 22 miles away.
All of YO8 is covered. Streets in the area include Lund Lane and Hull Road, all of which we cover. We also cover the places around Lund: Osgodby (1 mile north-west), Selby (2 miles west), Barlow (3 miles south), Brayton (4 miles south-west) and Camblesforth (4 miles south). We also work in nearby towns such as Tadcaster (12 miles north-west), Thorpe Willoughby (5 miles west), Hambleton (6 miles west), Cawood (6 miles north-west), Church Fenton (9 miles west) and North Duffield (3 miles north-east).
Local landmarks in Lund
Typical jobs here are in homes near Cliffe Voluntary Controlled Primary School, Barlby High School and St. Andrew and the streets around them. The nearest railway station is Selby station, roughly 2.2 miles west of the centre. A little further out are Duffield Castle (3.7 miles north-east) and Menthorpe cum Bowthorpe (2.6 miles east). For a walk, there’s Skipwith Common.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price depends on:
- Whether we combine several jobs
- What the surface is made of
- The colour and finish to match
- Access to the area
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Your postcode, so we can check dates
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which typically takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Point us to the nearest place to park
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Do you need bath re-enamelling in Lund?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Lots of chips and rust spots
Questions to ask before booking
- Who will actually do the work
- The length of the guarantee and what it covers
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
How to look after the repair
So the finish stays in good condition:
- Respect the curing time we give you
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Lund questions
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Are there extra charges for Lund?
Travel is included in the price, with the same prices everywhere we work.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Lund?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Work done at your home or business
- Colours mixed by hand to suit your surface
- No need to remove anything
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
