Hampshire · England
Bath Re-enamelling in Brighton Hill
Full bath re-enamelling and resurfacing in Brighton Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A coloured bath you want in white
Bath re-enamelling at your home in Brighton Hill
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix chips and rust in more than one place and a bath in a colour that no longer suits, on pressed steel baths, acrylic baths and cast iron baths.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Brighton Hill (RG22, RG21)
- Area hub
- Hampshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
When to call us in Brighton Hill
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- Stains that will not shift
- An old resurfacing that is failing
- Several chips and rust patches
- An outdated colour you’d like to change
Questions to ask before you book
- How the room is protected while they work
- If travel is included in the price
- Aftercare advice
- How soon you can use it again
Nearby places to Brighton Hill
What else we do in Brighton Hill
Brighton Hill and nearby
Brighton Hill is about 1 mile south of Basingstoke, in Hampshire. Anywhere in RG22, we carry out the work at your property. Brighton Hill is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 47 miles away.
Every address in RG22 and RG21 is within our area. You will find streets such as Pheby Road, Wella Road and Barber Road. Brighton Hill is on the A30, so it’s easy for us to reach. Nearby, we also work in South Ham (1 mile north), Buckskin (1 mile north-west), Basingstoke (1 mile north), Hatch Warren (1 mile south) and Kempshott (1 mile west). Further out, we also cover Farnborough (15 miles east), Fleet (12 miles east), Aldershot (15 miles east), Alton (9 miles south-east), Yateley (14 miles north-east) and Tadley (7 miles north).
Near you in Brighton Hill
Around Brighton Hill, we work in homes near The Church Of Christ The King, Chalk Ridge Primary School and Coppice Spring School and the streets around them. Other local landmarks include Brighton Hill Community School (within half a mile south-west), Eastrop Park (1.9 miles north-east) and Jolly Farmer Public House (1 mile south-east). Brighton Hill’s nearest station is Basingstoke station, roughly 1.6 miles north-east. Further afield, we also cover the area around Basingstoke and North Hampshire Hospital (2.1 miles north) and Festival Place (1.5 miles north-east). The countryside around Brighton Hill includes Daneshill Park Woods and Farleigh Hill.
Repairing versus replacing in Brighton Hill
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- We come to you, anywhere in the UK
- Generally one visit, start to finish
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page or bath cost comparison.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Brighton Hill. The price comes down to:
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The material and finish
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Natural light rather than flash
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Landlord and trade work in Brighton Hill
We work for landlords, letting agents and housing providers in Brighton Hill as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Brighton Hill
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Common questions in Brighton Hill
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
