Hampshire · England
Bath re-enamelling & resurfacing in Buckskin, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Buckskin and across Hampshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
How we handle bath re-enamelling in Buckskin
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coloured bath you want in white and worn patches where water runs and sits, we can normally put it right, on Victorian roll-tops, pressed steel baths and cast iron baths alike.
You get a one-year guarantee, the same in Buckskin as everywhere else we work.
- Where
- Buckskin (RG22, RG23)
- County
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Buckskin
Buckskin is about 1 mile west of Basingstoke, in Hampshire. Anywhere in RG22, we carry out the work at your property. Buckskin is one of 683 towns and villages in Hampshire we cover. We work right across the region, from Buckskin to London (about 48 miles away).
Our technicians cover all of the RG22 and RG23 postcode area. You will find streets such as Warham Road, Church Lane and Wayside Road, and we cover them all. Close by, we cover Worting (1 mile north-west), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Brighton Hill (1 mile south-east). Within a short drive, we also cover Fleet (13 miles east), Alton (10 miles south-east), Yateley (14 miles north-east), Tadley (7 miles north), Bordon (15 miles south-east) and Hook (8 miles east).
Near you in Buckskin
Our customers here include homes close to Coppice Spring School, The White Hart Inn and Church of St Thomas A Becket. Also close by are Chiltern Primary School (under half a mile north) and Bishop Challoner Catholic Secondary School (0.5 miles east). The closest station to Buckskin is Basingstoke station, about 2 miles east of the centre. A little further out are Park Prewett Hospital (1.6 miles north) and The Malls (2 miles east). Not far away are Farleigh Hill and Daneshill Park Woods.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How much damage there is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Phone pictures are fine. Just ensure we can see:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Details of any past repairs
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Also near Buckskin
Other services in Buckskin
Buckskin questions
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Common problems we fix in Buckskin
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
What to look for in a quote
- How long the guarantee is and what it covers
- What protection goes down before work starts
- Aftercare advice
- Whether they match the colour on site
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
- Do not use the bath until it has fully cured
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Buckskin clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your photos
- A year’s guarantee on all work
- Rooms protected and left tidy
Take a look at our pricing or bath cost comparison.
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Read more
When we would advise against a repair
In fairness, some problems need a different fix:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
