Hampshire · England
Bath Re-enamelling in Worting
Bath re-enamelling in and around Worting: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that won’t shift
Landlord and trade work in Worting
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We regularly work with letting and managing agents. Send the address, photos and access details.
How we handle bath re-enamelling in Worting
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s enamel that’s lost its shine and feels rough and worn patches where water runs and sits, we can typically put it right.
All our work is covered by a one-year guarantee, wherever you are in Hampshire.
- Area
- Worting (RG22, RG23)
- County
- Hampshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why us?
- Honest advice, even when it means no job
- Colour-matched on site
- One visit for most repairs
- We leave the room as we found it
See our pricing or bath cost comparison.
Places near Worting
More services for Worting
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Common problems we fix in Worting
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Keep an eye out for any of the following:
- A dull, rough surface that will not come clean
- Wear marks under the taps
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
What your quote should include
- If travel is included in the price
- Aftercare advice
- How long it needs to cure
- Who turns up on the day
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- The colour and finish to match
- How much damage there is
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- Something in shot to show the size
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
If you are in Worting and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Worting and nearby
Worting is about 2 miles west of Basingstoke, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Worting is one of 683 towns and villages in Hampshire where we work. Our jobs stretch from Worting to London (about 48 miles away).
All of RG22 and RG23 is covered. From Warham Road, Church Lane and Wayside Road or anywhere nearby, a technician can come to you. If you’re just outside Worting, we cover Buckskin (1 mile south-east), Winklebury (1 mile north-east), South Ham (1 mile east), Kempshott (1 mile south) and Newfound (1 mile west). Larger places within reach include Fleet (13 miles east), Andover (15 miles west), Alton (10 miles south-east), Yateley (14 miles east), Tadley (6 miles north) and Hook (8 miles east).
Landmarks near Worting
Typical jobs here are in homes near The White Hart Inn, Coppice Spring School and Chiltern Primary School and the streets around them. Other local landmarks include Bishop Challoner Catholic Secondary School (0.7 miles south-east) and Church of St Thomas A Becket (within half a mile west). The closest station to Worting is Basingstoke station, about 2.1 miles east of the centre. Further afield, we also cover the area around Park Prewett Hospital (1.5 miles north-east) and Basing House (3.7 miles east). Open spaces near Worting include Farleigh Hill and Daneshill Park Woods.
How it works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Read more
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Worting: your questions answered
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
About our accreditations · Every repair comes with a one-year guarantee.
