North Yorkshire · England
Bath Re-enamelling in Brough with St Giles
Full bath re-enamelling and resurfacing for homes and businesses in Brough with St Giles and across North Yorkshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- An old resurfacing that is failing
- A coloured bath you want in white
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Brough with St Giles
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Bath re-enamelling in Brough with St Giles without replacing anything
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are enamel that’s lost its shine and feels rough and stains that won’t shift.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Brough with St Giles (DL9, DL10)
- Area hub
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Brough with St Giles
More services for Brough with St Giles
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Prices start from £350. We charge the same wherever you are, with no extra for Brough with St Giles. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Brough with St Giles clients choose us
- Nothing taken out or refitted
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
Take a look at our full price list and resurfacing vs replacement cost guide.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
When to call us in Brough with St Giles
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- Wear marks under the taps
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
What to look for in a quote
- A fixed quote, and whether VAT is included
- Who will actually do the work
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
FAQs for Brough with St Giles
Is it safe with children and pets around?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across North Yorkshire.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Brough with St Giles and the surrounding area
Brough with St Giles is about 2 miles east of Catterick Garrison, in North Yorkshire. From the centre of Brough with St Giles to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Brough with St Giles is one of 626 towns and villages in North Yorkshire where we work. Our jobs stretch from Brough with St Giles to Leeds (about 40 miles away).
Every address in DL9 and DL10 is covered. Jobs here include addresses on Somme Way, Cambrai Close and Easby Crescent. Nearby, we also work in Brompton-on-Swale (1 mile north), Catterick Bridge (1 mile north-east), Colburn (1 mile west), Catterick (1 mile east) and Tunstall (2 miles south). Within a short drive, we also cover Northallerton (10 miles east), Richmond (3 miles north-west), Bedale (7 miles south-east), Romanby (10 miles east), Aiskew (7 miles south-east) and Leyburn (8 miles south-west).
Around Brough with St Giles
Our customers here include homes close to Risedale School, Brompton-on-Swale Church of England Primary School and Church of St Paulinus Presbytery And Attached Outbuildings and the streets around them. Well-known places in the area include Duchess of Kent Military Hospital (1.8 miles west) and Richmond Castle Museum (3.2 miles north-west).
Looking after it afterwards
To keep it looking its best:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
The process
Arrival times are agreed in advance. Once we’re there, the work takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say immediately whether it can be repaired.
Advice
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- How hard the colour is to match
- Access to the area
- Whether old repairs or coatings need taking off
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Any details about the material
- Natural light rather than flash
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
