Flintshire · England
Bath re-enamelling & resurfacing in Broughton, Flintshire
Damaged bath in Broughton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Lots of chips and rust spots
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Dust sheets down, tidy finish
Read our pricing and bath cost comparison.
Bath re-enamelling in Broughton without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Whether it’s a peeling or bubbling previous coating and a roll-top that’s seen better days, we can help.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Area
- Broughton (CH4)
- County
- Flintshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Broughton
More services for Broughton
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Keeping it looking good
To keep it looking its best:
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Landlord and trade work in Broughton
For anyone letting property in or around Broughton, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Questions from Broughton
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
Can you do the outside of a roll-top?
Yes. Inside and out.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you cover the whole of Flintshire?
We work UK-wide. Our prices are the same everywhere.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Flintshire.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Have a window or extractor fan available
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Honest limits
A repair is not right for every job, for example:
- A metal bath with a through crack
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Where we work around Broughton
Broughton is about 4 miles east of Bwcle, in Flintshire. Jobs in Broughton are booked in like any other job: a fixed price from your photos, then a visit to do the work. Broughton is one of 139 towns and villages in Flintshire we cover. Our nearest city page is Liverpool, about 17 miles away.
Every address in CH4 is within our area, from the main roads to the quietest streets. From Church Road, Gladstone Road and Broughton Hall Road or anywhere nearby, we can come to you. Neighbouring places we cover include Broughton and Bretton (1 mile north-east), Lower Kinnerton (1 mile south), Bretton (1 mile east), Kinnerton Green (1 mile south) and Saltney (2 miles north-east). Larger places within reach include Connah's Quay (5 miles north-west), Buckley (4 miles west), Bwcle (4 miles west), Flint (8 miles north-west), Saltney (3 miles east) and Mold (6 miles west).
Landmarks near Broughton
Typical jobs here are in homes near Broughton Primary School, St Mary's Church and St David's High School. The closest station to Broughton is Hawarden station, about 2.3 miles north-west of the centre. A little further out are West Saltney (2.2 miles north) and Buckley Library (3.8 miles west). For a walk, there is Padeswood Pool and Pen Pontblyddyn.
What affects the price in Broughton
Prices start from £350. You won’t pay by the hour. The price depends on:
- How many areas need work
- Whether we combine several jobs
- How hard the colour is to match
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- Details of any past repairs
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
