Flintshire · England
Bath Re-enamelling for Broughton and Bretton homes
Our repair technicians come to Broughton and Bretton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A dull, rough surface that will not come clean
Bath re-enamelling in Broughton and Bretton, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, we can help.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Broughton and Bretton (CH4, CH5)
- Region
- Flintshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. You will know the full cost before you book. We take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- The type of damage
- The colour and finish to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- What it’s made of, if you know
To get a price, send two or three pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Also near Broughton and Bretton
Also in Broughton and Bretton
The process
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow most of the day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Common problems we fix in Broughton and Bretton
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Get in touch if you’ve noticed:
- Wear marks under the taps
- A peeling or bubbling previous coating
- Stains that won’t shift
- An original cast iron bath that needs restoring
Comparing quotes
- How to look after the finish
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Aftercare tips
After the repair has cured, a few habits help it last:
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Where we work around Broughton and Bretton
Broughton and Bretton is about 2 miles west of Saltney, in Flintshire. From the centre of Broughton and Bretton to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Broughton and Bretton is one of 139 towns and villages in Flintshire we cover. Our jobs stretch from Broughton and Bretton to Liverpool (16 miles away).
Our visits in CH4 and CH5 work the same way as everywhere else we cover. That includes homes on Main Road, Wood Lane and Church Road and the roads around them. Close by, we cover Bretton (1 mile east), Broughton (1 mile south-west), Lower Kinnerton (1 mile south), Saltney (1 mile north-east) and Saltney Ferry (1 mile north-east). We also work in nearby towns such as Connah's Quay (5 miles north-west), Buckley (4 miles west), Bwcle (4 miles west), Flint (8 miles north-west), Mold (7 miles west) and Holywell (12 miles north-west).
Near you in Broughton and Bretton
Our clients here include homes close to St Mary's Church, Broughton Primary School and St David's High School, among other places. The nearest railway station is Hawarden station, roughly 2.4 miles north-west. Further afield, we also cover the area around West Saltney (1.9 miles north) and Water Tower (3.6 miles north-east). Open spaces near Broughton and Bretton include Padeswood Pool and Pen Pontblyddyn.
Landlords, agents and businesses in Broughton and Bretton
We work for landlords, letting agents and housing providers in Broughton and Bretton as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Common questions in Broughton and Bretton
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
How much does bath re-enamelling cost in Broughton and Bretton?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Flintshire.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
About our accreditations · Every repair comes with a one-year guarantee.
