Cumbria · England
Bath Re-enamelling in Broughton Mills
Damaged bath in Broughton Mills? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Common questions in Broughton Mills
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you cover Broughton Mills?
Yes, we do. We send a technician to Broughton Mills for every job, and the price is the same as everywhere else.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Which areas do you work in?
We work UK-wide, and that includes Broughton Mills. Prices don’t change with location.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Bath re-enamelling in Broughton Mills without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people contact us are brown or grey marks that don’t clean off and lots of chips and rust spots.
All our work comes with a one-year guarantee.
- Location
- Broughton Mills (LA20)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
After the repair has cured, a few habits help it last:
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Honest limits
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Also near Broughton Mills
More services for Broughton Mills
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Landlords, agents and businesses in Broughton Mills
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Broughton Mills and the surrounding area
Broughton Mills is about 9 miles north-west of Ulverston, in Cumbria. Jobs in Broughton Mills are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Broughton Mills is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Liverpool, about 63 miles away.
Postcode districts we cover here: LA20. Close by, we cover Bank End (2 miles south-west), Broughton in Furness (2 miles south), Duddon Bridge (2 miles south-west), Ulpha (2 miles north-west) and Foxfield (3 miles south). Within a short drive, we also cover Barrow-in-Furness (13 miles south), Ulverston (9 miles south-east), Hindpool (13 miles south), Salthouse (13 miles south), Dalton-in-Furness (10 miles south) and Risedale (13 miles south).
Around Broughton Mills
Around Broughton Mills, we work in homes near Holy Innocents Church and Blacksmiths Arms, among other places. The nearest railway station is Foxfield station, roughly 3.2 miles south. The countryside around Broughton Mills includes Stickle Tarn and Caw.
What we’re called out for in Broughton Mills
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- Thin, worn enamel in places
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
Comparing quotes
- How the colour is matched
- Aftercare advice
- How the room is protected while they work
- What happens if they find more damage
What bath re-enamelling costs
Prices start from £350. You’ll know the full cost before booking. We take into account:
- How much damage there is
- Whether we combine several jobs
- The material and finish
- Where the damage is and how we get to it
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
