Walsall · England
Bath Re-enamelling for Brownhills West homes
Problem with your bath in Brownhills West? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
Work for landlords and builders
We work for landlords, letting agents and housing providers in Brownhills West as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Walsall and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Bath re-enamelling in Brownhills West, done in place
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a bath that stays dull however much you clean it and stains that won’t shift, on cast iron baths, Victorian roll-tops and basins & shower trays.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Brownhills West (WS8, WS11)
- Area hub
- Walsall
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Brownhills West. What changes the price is:
- Doing more than one item at once
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One picture of the whole bath
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A clear, close picture of the problem area
Upload photos of the damage and a wider shot of the entire item, with your WS8 postcode, and we will reply with a fixed price.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Looking after it afterwards
Once the work has cured, treat it gently:
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Never use suction bath mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How the visit works
Arrival times are agreed in advance. Once we’re there, the work takes a full day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Open a window if you can
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
Read more
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
What we can’t put right
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Also near Brownhills West
What else we do in Brownhills West
Brownhills West questions
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Signs you need bath re-enamelling in Brownhills West
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Most people contact us when they notice something like this:
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Several chips and rust patches
- A peeling or bubbling previous coating
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
Our work in Brownhills West
Brownhills West is about 1 mile north-west of Brownhills, in Walsall. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 39 places in Walsall, from the larger towns to small villages. You can also see our page for Birmingham, about 13 miles away.
We work across WS8 and WS11. That includes homes on Medway Road, Severn Road and Albutts Road and the roads around them. Neighbouring places we cover include Common Side (1 mile north-west), Little Norton (1 mile north-west), Norton Canes (1 mile north-west), Clayhanger (1 mile south) and Little Wyrley (1 mile west). We also work in nearby towns such as Walsall (6 miles south), Willenhall (6 miles south-west), Bloxwich (4 miles south-west), Aldridge (4 miles south), Caldmore (6 miles south) and Blakenall Heath (4 miles south-west).
What’s near Brownhills West
Typical jobs here are in homes near Brownhills West Primary School, Brownhills School and Erasmus Darwin Academy. For rail, the closest station is Landywood station, about 2.9 miles west of the centre. A little further out are Letocetum Roman Baths And Museum (4 miles east) and Ogley Hay Rural (2.5 miles east). Green spaces nearby include George's Hayes.
About our accreditations · Every repair comes with a one-year guarantee.
