Walsall · England
Bath re-enamelling & resurfacing in Clayhanger, Walsall
We travel to Clayhanger for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Looking after it afterwards
How the surface is treated afterwards matters:
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Bath re-enamelling at your home in Clayhanger
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for chips and rust in more than one place and a coloured bath you want in white, in pressed steel baths, cast iron baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Clayhanger (WS8)
- Region
- Walsall
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Clayhanger?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing typically wins. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Clayhanger. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- One visit for most repairs
- No extra charge for your area
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or guide to resurfacing and replacement costs.
What happens on the day
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes a full day, and we’ll keep you posted as we go.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Also near Clayhanger
Also in Clayhanger
What we can’t put right
A repair is not right for every job, for example:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
When to call us in Clayhanger
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Most people get in touch after spotting one of these:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Questions to ask before you book
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
- What prep work is covered
- What aftercare is recommended
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
If you manage property in Clayhanger, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Questions from Clayhanger
How do I get a price for bath re-enamelling in Clayhanger?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your WS8 postcode.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Walsall.
Do you cover Clayhanger?
Yes. We cover the whole UK and travel to Clayhanger. Send us photos for a fixed quote, or call 0345 017 0787.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Clayhanger and nearby
Clayhanger is about 1 mile west of Brownhills, in Walsall. Across the WS8 area, we come to you. Clayhanger is one of 39 towns and villages in Walsall where we work. You can also see our page for Birmingham, about 12 miles away.
Here we cover the WS8 postcode area. Local streets include High Street, Rushbrook Close and Clayhanger Lane. Neighbouring places we cover include Brownhills (1 mile east), Walsall Wood (1 mile south-east), Vigo (1 mile south-east), Sandhills (1 mile east) and Brownhills West (1 mile north). Further out, we also cover Walsall (4 miles south), Willenhall (5 miles south-west), Bloxwich (3 miles south-west), Aldridge (3 miles south-east), Caldmore (5 miles south) and Blakenall Heath (3 miles south-west).
What’s near Clayhanger
In Clayhanger, that means homes near Holy Trinity Worship Centre, Holy Trinity Church of England Primary School and Brownhills School. Other local landmarks include The Anchor pub (0.8 miles east) and Shire Oak Academy (1 mile east). Clayhanger’s nearest station is Bloxwich station, about 3.3 miles south-west. Well-known places in the area include Letocetum Roman Baths And Museum (3.7 miles east) and Walsall Castle (4.6 miles south-west). The countryside around Clayhanger includes Pouk Hill and Bourne Pool.
- Parks and local facilities nearby include Ogley Hay Rural (2 miles east)
About our accreditations · Every repair comes with a one-year guarantee.
