Somerset · England
Bath Re-enamelling in Brushford
Full bath re-enamelling and resurfacing for homes and businesses in Brushford and across Somerset. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
About our bath re-enamelling in Brushford
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and people most often call us about an old resurfacing that’s failing and brown or grey marks that don’t clean off.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Brushford (TA22)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Brushford. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- Most jobs done in one visit
Take a look at our prices page and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take a full day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Get a quote
Upload photos of the damage and a wider shot of the entire item, with your TA22 postcode, and we will reply with a fixed price.
Related advice
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Brushford. What changes the price is:
- How hard the colour is to match
- The material
- How many items we do on one visit
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the entire bath
- Something in shot to show the size
- Details of any past repairs
- Natural light rather than flash
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Also in Brushford
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Do not leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs immediately
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Landlords, agents and businesses in Brushford
For anyone letting property in or around Brushford, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Where we work around Brushford
Brushford is about 8 miles north of Tiverton, in Somerset. Whether you are in the middle of Brushford or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Brushford is one of 640 towns and villages in Somerset we cover.
Postcode districts we cover here: TA22. You’ll find streets such as Brushford New Road, Ellersdown Lane and Silverdale Close. We also travel to Dulverton (1 mile north), Bury (2 miles north-east), Morebath (2 miles east), Oakfordbridge (2 miles south) and Oakford (3 miles south). Within a short drive, we also cover Minehead (13 miles north), Wellington (14 miles east), Watchet (14 miles north-east), Wiveliscombe (10 miles east), Williton (14 miles north-east) and Bishops Lydeard (15 miles east).
Near you in Brushford
Typical jobs here are in homes near The Anchor Inn and Church of St Nicholas and the streets around them. Further afield, we also cover the area around Brewer's Castle (3.6 miles north-west). For a walk, there’s Wimbleball Lake.
Common questions in Brushford
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Do you come to Brushford?
Yes, we do. We send a technician to Brushford for every job, with no extra charge for travel.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
When a repair is not the answer
A repair is not always the answer, and we will tell you before we start. We cannot fix:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
