Devon · England
Bath Re-enamelling in Morebath
Full bath re-enamelling and resurfacing in Morebath, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
How we handle bath re-enamelling in Morebath
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s wear marks under the taps and an old resurfacing that’s failing, we can help, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
You get a one-year guarantee, the same in Morebath as everywhere else we work.
- Location
- Morebath (EX16)
- Area hub
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Morebath
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people contact us when they notice something like this:
- A dull, rough surface that won’t come clean
- Stains that will not shift
- A bath in a colour that no longer suits
- Wear marks under the taps
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether the price covers travel
- How long it needs to cure
- How the room is protected while they work
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Why repair rather than replace?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- Colour-matched on site
- Same prices wherever you are
- We leave the room as we found it
- Work done at your home or business
Read our full price list and bath cost comparison.
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to the best part of a day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- The size and number of damaged areas
- How easy the damage is to reach
- The type of damage
- Any earlier repairs that need removing first
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- A photo taken from further back
- Details of any past repairs
- Something in shot to show the size
- Your postcode, so we can check dates
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Nearby places to Morebath
More services for Morebath
Landlords, agents and businesses in Morebath
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about bath re-enamelling in Morebath
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Are there extra charges for Morebath?
No. Our quotes include travel, with the same prices everywhere we work.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you do the outside of a roll-top?
Yes. Inside and out.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Morebath and the surrounding area
Morebath is about 7 miles north of Tiverton, in Devon. Jobs in Morebath are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Morebath is one of 586 towns and villages in Devon we cover.
Here we cover the EX16 postcode area. If you are just outside Morebath, we cover Bampton (2 miles south), Shillingford (2 miles east), Bury (2 miles north-west), Brushford (2 miles west) and Oakfordbridge (3 miles south-west). Within a short drive, we also cover Tiverton (7 miles south), Cullompton (12 miles south), South Molton (15 miles west), Willand (10 miles south-east), Uffculme (10 miles south-east) and Bradninch (13 miles south).
What’s near Morebath
Around Morebath, we work in homes near St George's Church, among other places. Further afield, we also cover the area around Pepperpot Castle (3.2 miles north-east). Not far away are Wimbleball Lake.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Never use suction bath mats
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
