Somerset · England
Bath re-enamelling & resurfacing in Bury, Somerset
Bath re-enamelling across Bury and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Wear marks under the taps
Bath re-enamelling in Bury without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating, across basins & shower trays, Victorian roll-tops and cast iron baths.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Bury (TA22)
- Region
- Somerset
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Bury
Bury is about 9 miles north of Tiverton, in Somerset. Clients in Bury get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We cover 640 places across Somerset, from the larger towns to small villages.
Postcode districts we cover here: TA22. If you’re just outside Bury, we cover Dulverton (2 miles west), Brushford (2 miles south-west), Morebath (2 miles south-east), Brompton Regis (2 miles north) and Woolcotts (3 miles north-east). We also work in nearby towns such as Minehead (12 miles north), Wellington (13 miles east), Watchet (13 miles north-east), Wiveliscombe (9 miles east), Williton (12 miles north-east) and Bishops Lydeard (14 miles east).
Around Bury
Other landmarks nearby include Pepperpot Castle (2.9 miles east). For a walk, there is Wimbleball Lake.
Towns and villages near Bury
Also in Bury
Aftercare tips
So the finish stays in good condition for years:
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Never use suction bath mats
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Signs you need bath re-enamelling in Bury
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- Staining under the taps and around the waste
- Chips and rust in more than one place
- A coating lifting around the plughole
- A bath in a colour that no longer suits
Before booking anyone
- A fixed quote, and whether VAT is included
- Whether there are any call-out or travel charges
- What protection goes down before work starts
- Whether the colour is mixed to match
What affects the price in Bury
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Phone pictures are fine. Just make sure we can see:
- Where you are, by postcode
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
If you’re in Bury and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Clear the area around the damage
- Open a window if you can
- Keep pets and children out of the room while we work
How to get a price
Send us photos of the damage and one of the entire item, and tell us you’re in Bury, and we will reply with a fixed quote.
Advice
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Repairing versus replacing in Bury
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Everything repaired in place
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Typically one visit, start to finish
Take a look at our pricing or bath cost comparison.
Bury: your questions answered
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Are there extra charges for Bury?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Which areas do you work in?
All of Somerset, and the rest of the UK. There’s no extra charge for travel.
What happens next?
You’ll get a fixed quote back. There’s no obligation to book.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Landlord and trade work in Bury
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
