Flintshire · England
Bath re-enamelling & resurfacing in Bryncelyn, Flintshire
Problem with your bath in Bryncelyn? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Landlord and trade work in Bryncelyn
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Bryncelyn use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Bath re-enamelling in Bryncelyn, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and people most often call us about worn patches where water runs and sits and stains that won’t shift.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Bryncelyn (CH8)
- Area hub
- Flintshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Bryncelyn
Bryncelyn is about 6 miles south-west of Heswall, in Flintshire. From the centre of Bryncelyn to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Bryncelyn is one of 139 towns and villages in Flintshire we cover. You can also see our page for Liverpool, about 15 miles away.
Our technicians cover all of CH8 and the streets around it. Jobs here include addresses on New Road, North Road and Delyn Road. Main roads around Bryncelyn include the A5026, so getting to you is simple. If you’re just outside Bryncelyn, we cover Holywell (1 mile south), Greenfield (1 mile north-east), Pen-y-maes (1 mile south-east), Tai-Drill (1 mile north-east) and Carmel (1 mile west). Within a short drive, we also cover Connah's Quay (8 miles south-east), Buckley (9 miles south-east), Bwcle (10 miles south-east), Flint (4 miles south-east), Saltney (14 miles south-east) and Mold (9 miles south).
Landmarks near Bryncelyn
Around Bryncelyn, we work in homes near Parish Church of St James, St Winefride's Church and Royal Oak P.H.Greenfield Road pub and the streets around them. Other local landmarks include Ysgol Treffynnon (less than half a mile south) and Ysgol Maes-Y-Felin (under half a mile south-east). Bryncelyn’s nearest station is Flint station, about 4.2 miles south-east. Other landmarks nearby include Holywell Castle Mound (within half a mile south-west) and Holywell Community Hospital (0.8 miles south). For a walk, there is Llyn Helyg and Pen y Ball Top.
When to call us in Bryncelyn
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Most people get in touch after spotting something like this:
- Chips and rust in more than one place
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
Comparing quotes
- What protection goes down before work starts
- Who turns up on the day
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep suction mats out of the bath
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Ensure the area is dry
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
Bryncelyn: your questions answered
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you cover Bryncelyn?
Yes. We work across the UK and travel to Bryncelyn. Send pictures and we’ll quote, or call 0345 017 0787.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- Doing more than one item at once
- What the surface is made of
- How many areas need work
- What kind of damage it is
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- Any details about the material
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
Most clients in Bryncelyn get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Towns and villages near Bryncelyn
Also in Bryncelyn
About our accreditations · Every repair comes with a one-year guarantee.
