Hertfordshire · England
Bath re-enamelling & resurfacing in Bulls Cross, Hertfordshire
Bath re-enamelling in and around Bulls Cross: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Thin, worn enamel in places
Signs you need bath re-enamelling in Bulls Cross
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Common reasons people in Bulls Cross contact us include:
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
Before booking anyone
- Whether the colour is mixed to match
- How soon you can use it again
- How your room will be protected
- Whether cleaning and preparation are in the price
How we handle bath re-enamelling in Bulls Cross
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We are frequently asked to fix wear marks under the taps and an outdated colour you’d like to change, in Victorian roll-tops, basins & shower trays and pressed steel baths.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Bulls Cross (EN1, EN3, EN8)
- Region
- Hertfordshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Hertfordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Bulls Cross use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Open a window if you can
- Have somewhere for us to park nearby if possible
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Honest limits
Some jobs are not right for a repair, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Our work in Bulls Cross
Bulls Cross is about 2 miles north-east of Enfield, in Hertfordshire. Clients in Bulls Cross get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Bulls Cross is one of 381 places in Hertfordshire we cover. Our nearest city page is London, about 12 miles away.
Every address in EN1, EN3 and EN8 is covered. Whether you live on Capel Road, Kempe Road and Yews Avenue or a nearby road, a technician can come to you. Bulls Cross sits on or near the M25, which makes travel easy. Nearby, we also work in Bullsmoor (1 mile east), Forty Hill (1 mile south), Enfield Wash (1 mile south-east), Clay Hill (1 mile west) and Freezywater (1 mile east). Further out, we also cover Watford (15 miles west), St Albans (13 miles north-west), Welwyn Garden City (10 miles north-west), Hoddesdon (6 miles north), Hatfield (9 miles north-west) and Hertford (8 miles north).
Local landmarks in Bulls Cross
Typical jobs here are in homes near The Pied Bull Public House, St Ignatius College and Capel Manor Primary School and the streets around them. Other local landmarks include Aylands School (0.7 miles east) and Jesus Church (0.5 miles south). The closest station to Bulls Cross is Turkey Street station, roughly 0.6 miles south-east of the centre. A little further out are St Michaels Hospital (1.6 miles south-west) and Museum of Enfield (2.1 miles south-west). Not far away are Bowyer's Water and Fir and Pond Woods.
- Parks and local facilities nearby include Municipal Borough of Enfield (1.4 miles south-west)
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- The size and number of damaged areas
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Your postcode, so we can check dates
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Places near Bulls Cross
What else we do in Bulls Cross
Questions from Bulls Cross
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
How to look after the repair
Nothing complicated is needed:
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
