Greater London · England
Bath re-enamelling & resurfacing in Enfield, Greater London
Bath re-enamelling across Enfield and nearby, generally in one visit.
- Resurfacing from £350
- Several chips and rust patches
- Wear marks under the taps
Signs you need bath re-enamelling in Enfield
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Customers generally contact us about:
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Comparing quotes
- How the colour is matched
- How soon you can use it again
- How the room is protected while they work
- What aftercare is recommended
About our bath re-enamelling in Enfield
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Whether it’s an original cast iron bath that needs restoring and staining under the taps and around the waste, we can typically put it right, whatever the material.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Enfield (EN1, EN2, N21)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Our work in Enfield
Enfield is about 9 miles north of St Pancras, in Greater London. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Enfield is one of 764 places in Greater London where we work. We work right across the region, from Enfield to London (11 miles away).
Here we cover the EN1, EN2 and N21 postcode area. From Lea Road, Farr Road and Cecil Road or anywhere nearby, a technician can come to you. With the A110 close by, Enfield is easy for our repair technicians to reach. We also cover the places around Enfield: Bush Hill Park (1 mile south-east), Bush Hill (1 mile south), Enfield Chase (1 mile west), Gordon Hill (1 mile north) and Forty Hill (1 mile north-east). Further out, we also cover London (11 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (12 miles south-west), St Pancras (9 miles south) and Shoreditch (9 miles south).
Near you in Enfield
Locally, our jobs take us to homes close to Grange Park Preparatory School, St Andrew's CofE Primary School and Church of St Andrew. Nearby too are Enfield Grammar School (within half a mile north-west), Enfield Town Park (within half a mile south-west) and Kings Head pub (less than half a mile west). There is a railway station in Enfield itself: Enfield Town station. Well-known places in the area include St Michaels Hospital (0.7 miles north) and Museum of Enfield (less than half a mile south). Green spaces nearby include Bowyer's Water and Pole Hill.
- Other local spots include Municipal Borough of Enfield (1.3 miles north)
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How to care for the repair
Nothing complicated is needed:
- Do not use the bath until it has fully cured
- Store bottles off the bath
- Get any chip repaired quickly
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Enfield. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The material and finish
- Doing more than one item at once
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- Something in shot to show the size
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Enfield questions
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Places near Enfield
Also in Enfield
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the following day.
How to prepare
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
